Updated Feb-2022 Test Engine to Practice NCP-DS Dumps & Practice Exam
Dumps Collection NCP-DS Test Engine Dumps Training With 100 Questions
Nutanix NCP-DS Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 16
An administrator is experiencing the following objects failure error message:
IAM service is not healthy
The object store domain entries appear grayed out in the user interface, as shown in the exhibit.
Which commands should the administrator execute to identify the failure source?
- A. A mspctl cluster_objects
B mspctl status -u <UUID-UUID-UUID-UUID> - B. A mspcli cluster_objects
B mspcli status -u <UUID-UUID-UUID-UUID> - C. A mspctl cluster_list
B mspctl status -u <UUID-UUID-UUID-UUID> - D. A mspcli cluster_list
B mspcli status -u <UUID-UUID-UUID-UUID>
Answer: B
NEW QUESTION 17
A company has distributed a new document bundle, entitled Health and Security Policies to all employees H has to verify if key users have opened the document How can an administrator support this request with File Analytics
- A. Use Audit Trails search for Files View Audit and filter by operations
- B. Use Audit Trails search for Users, View Audit and filter by file
- C. Select the User from the Top 5 Active Users list the filter by file
- D. Select the file from the Top 5 Accessed list then filter by user
Answer: B
NEW QUESTION 18
What are the three predefined resource profiles when deploying Objects?
- A. Small, Medium, and Large
- B. Small, Medium, and Heavy
- C. Light Medium, and Large
- D. Light Medium, and Heavy
Answer: D
NEW QUESTION 19
A company is implementing Files and has these requirements
* Six departments
* Each department needs to access its own shared namespace
* 18,000 users
Given the nature of the workload the administrator has decided to scale up by adding the maximum amount of CPU and RAM What should the administrator implement to satisfy the stated requirements?
- A. Six distributed shares with 18.000 concurrent sessions
- B. The administrator should create a standard share
- C. Six standard shares with 3.000 concurrent sessions
- D. The administrator should create a distributed share
Answer: A
NEW QUESTION 20
Refer to the exhibit.
An administrator reports that a Volume Group (VG) is no longer accessible on their server.
Upon attempting to reconnect, an error is displayed , as shown in the exhibit.
Which condition would cause this error?
- A. The client is trying to access the wrong target.
- B. The wrong CHAP secret has been configured.
- C. MPIO is enabled for the volume group
- D. Encryption is enabled for the container hosting the VG.
Answer: A
NEW QUESTION 21
A company has two Files clusters for their workloads. Once cluster is running VDI workloads and another one is running Big Data (large file ingestion) workloads. The administrator is planning to optimize the workload performance on the cluster where the VDI workloads are running.
The administrator needs to complete these requirements
* Determine the current workload type on the cluster.
* Optimize the file share for operations such as small overwrites into larger files Which two actions should the administrator take to satisfy this requirement? (choose two)
- A. Execute command afs share.edit share-name share_workload_type=default
- B. Set the share workload type to sequential
- C. Set the share workload type to random
- D. Execute command afs share.io_size_distribution
Answer: B
NEW QUESTION 22
An administrator would like to convert an existing Volume Group with an attached external Windows client to use Volumes The administrator has taken these actions
. Disconnect any existing SCSI targets
Remove targets from the Favorite Targets tab
* Remove targets from the Discovery tab
Which action must the administrator take next to complete this task?
- A. Connect without MPIO to the Cluster Virtual IP
- B. Connect with MPIO to the ISCSI Data Services IP
- C. Connect without MPIO to the iSCSI Data Services IP
- D. Connect with MPIO to the Cluster Virtual IP
Answer: C
NEW QUESTION 23
An administrator is upgrading Files and receives the following error
File Server preupgrade check failed with cause (s) FileServer in HA state A FSVM was noted to be powered off and was successfully powered back on Which command result will now enable the administrator to successfully reattempt the upgrade?
- A. nutanix@FSVM$ afs ha.minerva check ha state The state of the HA should display false
- B. nutanix@FSVM$ afs ha. Isv_check_ha_state The state of the HA should display False
- C. nutanix@FSVM$ afs ha.fsVm check ha state The state of the HA should display True
- D. nutanix@FSVM$ afs ha.minerva check_ha_state The state of the HA should display True
Answer: A
NEW QUESTION 24
An administer has a new requirement to separate management and block storage network traffic for bare-metal workloads. What should the administrator do to satisfy this requirement?
- A. Configure Management LAN to segment internal communication.
- B. Add a second virtual NIC to CVMs, configure them in prism.
- C. Configure Backplane LAN to isolate hypervisor traffic
- D. Enable Volumes network segmentation
Answer: A
NEW QUESTION 25
Where can an administrator find the latency associated with a Files SMB Share?
- A. File Server Performance Tab
- B. ncli > fs get-file-servers-usage
- C. File Analytics Health
- D. FSVM performance
Answer: A
NEW QUESTION 26
An administrator of an existing Nutanix cluster running Kubernetes with multiple PODs notices that NCC checks report that some volume groups experience the following error:
Node x.x.x.x:
FAIL: Volume Group pvc-XXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX space
usage (90%)
The administrator checks the volume group usage from the Kubernetes pod and get different usage results. The current stats are 55% used space.
The results of the NCC check do not match what manually-executed checks report.
What is the cause of this behavior ?
- A. The NCC checks need to be updated to the latest version.
- B. The garbage collection process has yet to run.
- C. Volumes has not received the needed UNMAP commands.
- D. Kubernetes is not correctly reporting its storage usage.
Answer: A
NEW QUESTION 27
A company is using a vSphere-based 5-node Nutanix cluster. Currently, the cluster is using three full HCl nodes and two storage-only nodes. VMs are configured with Volumes with multiple vDisks.
Which statement about Volumes Load Balancing is correct?
- A. vDisks are managed by the two storage-only nodes
- B. Disks can be redirected to all CVMs within the cluster
- C. VDisks can be redirected only to the three full HD nodes
- D. VDisks are managed by the CVM, which hosts the VM
Answer: B
NEW QUESTION 28
An administrator has mapped a Volume Group named VG1 to a VM. Due to changes in the application running inside the VM, two additional volumes are required. At the time of creation, the VM was assigned to a Protection Domain named PD1.
Which two steps should the administrator take to add the additional volumes to the VM while maintaining data protection? (Choose two)
- A. Manually update PD1 to include the newly created Disks
- B. Map the new vDisks as volumes to the VM
- C. Add the new vDisks to the same Consistency Group
- D. Add two additional Disks to VG1
Answer: A,D
NEW QUESTION 29
An administrator installed a new Log Analyzer which collects data from physical endpoints Data collected needs to be accessible and editable for three years after which the data must be deleted to optimize storage consumption Which setting should the administrator apply to meet these requirements?
- A. Create a Files share with a Lifecycle policy to win the Current files are three years
- B. Create a bucket with a Lifecycle policy to expire the current objects after three years.
- C. Create a Storage Container with a Lifecycle policy to expire the current version after three Years
- D. Create a WORM enabled bucket with Lifecycle policy to expire the current objects after three years
Answer: D
NEW QUESTION 30
A company requires that object data that is unused for a period of 12 months should be moved to AWS Glacier. This should be applied immediately to all new and existing data within the organization. An administrator creates and applies the tiering rule, but observes that no existing data is moved from buckets where the tiering rule is applied, despite being created over 12 months ago.
What is the reason for data over 12 months old failing to tier?
- A. Enable versioning has not been selected on the Tiering Endpoint configuration,
- B. The category has not been added to existing data.
- C. The Apply to existing data option has not been selected on the life cycle rule.
- D. Tiering lifecycle policies are non-retroactive.
Answer: A
NEW QUESTION 31
An administrator has selected Files for the file server implementation in the company. The following key requirements for the environment have been specified:
* All files written on the shares need to be scanned for viruses
* Certain file types must never be created or copied to any of the shares
* End users must beable to restore previous file versions or deleted files on their own
* Each user should not be able to write more than 100 GB of data on any share Which configuration will meet the above requirements?
- A. File Blocking and ICAP on the shares, and Quota policies. ABE and ICAP integration on the Files cluster
- B. File Blocking and Quota policies on the Files cluster, and ABE and ICAP integration on the shares
- C. File Blocking and Quota policies on the Files cluster, and SSR and ICAP integration on the shares
- D. File Blocking and ICAP on the Files cluster, and Quota policies SSR and ICAP integration on the shares
Answer: D
NEW QUESTION 32
An administrator experiences a failed Objects store deployment, as shown in the exhibit.
Which are the two primary logs that should be reviewed to triage deployment issues?
- A. /home/nutanix/data/logs/genesis.out
/home/nutanix/data/logs/msp_controller.out - B. /home/nutanix/data/logs/install.out
/home/nutanix/data/logs/msp_controller.out - C. /home/nutanix/data/logs/insights collector:out
/home/nutanix/data/logs/msp_controller.out - D. /home/nutanix/data/logs/aoss service manager.out
/home/nutanix/data/logs/msp_controller.out
Answer: D
NEW QUESTION 33
Email distribution lists in the company have been redesigned and IT now has a new distribution list dedicated for all alerts In File Analytics how should an administrator change the recipient list to receive email alerts?
- A. Click on the gear icon select Update AD/LDAP configuration and update the field Username
- B. Select User menu in the top right comer and click on Collect Logs
- C. Click on the gear icon, select SMTP configuration and update the field Recipient List
- D. Click on the gear icon select Define Anomaly Rules and update the field Anomaly Email Recipients
Answer: C
NEW QUESTION 34
Exhibit.
An administrator is experiencing the Objects error message shown in the exhibit The administrator needs to verify these health aspects of the underlying Kubernetes MSP cluster
* All pods are healthy and running
* All nodes are ready
* All components in Kubernetes platform are healthy
Which commands should the administrator execute to obtain these health validations?
- A. kubectl get cluster pods --all-namespaces
kubectl get cluster nodes -o wide
* kubectl get cluster component status - B. * kubectl config show-kind pods --all-namespaces
kubect1 config show-kind nodes -o wide
* kubectl config show-kind componentstatus - C. * kubectl get pods-all-namespaces
* kubectl get nodes -o wide
* kubectl get componentstatus - D. * kubectl config pods --all-namespaces
* kubectl config nodes -o wide
kubectl config componentstatus
Answer: C
NEW QUESTION 35
After migrating to Files for the company's users home directories, the administrator started receiving complaints that accessing certain files will often result in long wait times before the file is even opened or an access denied error message after four minutes Upon further investigation, the administrator has determined that the files in question are very large audio and videos Which two actions should the administrator take to mitigate this issue! (Choose two
- A. Enable the Scan on Write option increase resources for the ICAP server
- B. Uncheck the Block access to files if scan cannot be completed (recommended) option in the ICAP settings for the Files cluster.
- C. Add the extensions of the affected the types to the ICAP s Exclude File Types field in the ICAP settings for the Files cluster.
- D. Enable the Scan on Read option and decrease resources for the ICAP server
Answer: B
NEW QUESTION 36
......
Nutanix NCP-DS Dumps Cover Real Exam Questions: https://www.briandumpsprep.com/NCP-DS-prep-exam-braindumps.html
