[Sep-2021] NetApp Certified NS0-302 Exam Practice Dumps
2021 NS0-302 Premium Files Test pdf - Free Dumps Collection
NEW QUESTION 24
As the administrator of Cloud Insights, you installed the Acquisition Unit and configured the ONTAP Data Collector. You successfully added an ONTAP 9.5 system for monitoring. When you add another FAS system, you receive the error message shown below.
Error: "7 Mode filers are not supported"
In this situation, which statement Is correct?
- A. ONTAP Systems running In 7-Mode are not supported by Cloud Insights.
- B. You must configure the Data Collector for Data ONTAP 7-Mode.
- C. The communication between the Acquisition Unit and the ONTAP system gets blocked.
- D. You must use the correct admin level username and password.
Answer: B
NEW QUESTION 25
An administrator needs to set up a replication policy that uses minimal Snapshot copies at the source and a much larger number of Snapshot versions at the destination.
Using OnCommand Cloud Manager, which policy would enable this requirement?
- A. Backup
- B. Mirror
- C. snapshot
- D. retention
Answer: C
NEW QUESTION 26
You created an SMB volume in Cloud Volume Service. Before writing any data, the requirement changed to provide multiprotocol access to both NFS and SMB.
In this scenario, which action enables concurrent multiprotocol access?
- A. Create a new Dual-protocol volume.
- B. Change the volume security style.
- C. Create a usermap entry.
- D. Change the volume service level.
Answer: A
NEW QUESTION 27
An application developer asks you for a new Cloud Volumes Service volume for AWS that supports SMB and NFS access for development and testing purposes.
In this scenario, what should you do to support the developer's request?
- A. Provision two volumes, one for SMB and one for NFS.
- B. Provision a new Cloud Volumes Service volume as Dual-protocol.
- C. Provision a new Cloud Volumes Service NFS volume, and select the SMB option.
- D. Provision a new Cloud Volumes Service SMB volume, and select the NFS option.
Answer: B
NEW QUESTION 28
Click the Exhibit button.
You have deployed Cloud Volumes ONTAP for AWS. During the deployment, you use an existing security group as shown in the exhibit. You are not able to connect NFS or SMB clients to the Cloud Volumes ONTAP Instance.
In this scenario, which two changes must be made to the security group to solve this problem? (Choose two.)
- A. Change the source addresses to allow the 0.0.0.0/0 address.
- B. Change the allowed ports to allow SMB and NFS Inbound.
- C. Change to a new security group with access controls according to the documentation.
- D. Change the allowed ports to allow SMB and NFS outbound.
Answer: A,C
NEW QUESTION 29
Your customer wants to use FabricPool to save on-premises SSD capacity on a primary AFF A220 running ONTAP 9.5.
In this scenario, what is the cooling period range for cloud tiering?
- A. 1 to 54 days
- B. 7 to 90 days
- C. 14 to 93 days
- D. 2 to 63
Answer: C
NEW QUESTION 30
Your company has evaluated NetApp SaaS Backup for Microsoft Office 365 with a trial account. In the evaluation period, you used Amazon S3 that was provided by SaaS Backup as the destination for your backup. After evaluation, your company decided to use Bring Your Own Storage (BYOS) as a backup destination. You determine that none of your previous data is showing up.
What caused this problem?
- A. When upgrading from trial to licensed, data was not preserved.
- B. Upgrading from evaluation to licensed reset your SaaS Backup account.
- C. Changing the destination to BYOS did not migrate the data.
- D. During the change from evaluation to licensed, the access token expired.
Answer: B
NEW QUESTION 31
You have a 100 TB Cloud Volumes Service NFS volume called voli. You are asked to create a second read/write test copy of the volume called voll_test.
In this scenario, what is the fastest supported method to create voll_test?
- A. Create voll_test from a Snapshot copy.
- B. Use SnapMirror to mirror voll to voll_test.
- C. Use Cloud Sync to synchronize voll to voll_test.
- D. Use rsync to copy voll to voll_test.
Answer: B
NEW QUESTION 32
Click the Exhibit button.
Your Cloud Volumes Service export is mounted on a Red Hat Enterprise Linux instance. You can view a top-level directory listing, but you cannot create files.
Referring to the exhibit, what is the IP address of your Red Hat Enterprise Linux instance?
- A. 10.0.1.0
- B. 10.0.0.0
- C. 10.0.1.6
- D. 10.0.2.6
Answer: D
NEW QUESTION 33
You created a volume with Cloud Volumes Service for AWS for an analytics application. The application using the volume requires maximum performance. You have set the service level to "extreme". All the analysis takes place between 9:00 A.m. and 5:00 p.m.
In this scenario, how would you optimize storage cost?
- A. Use the API to lower the service level of the volume during off-peak hours.
- B. Use the built-in sync service to move the volume to another region with lower cost storage.
- C. Reduce the capacity of the volume.
- D. Create a new volume with a lower service level.
Answer: C
NEW QUESTION 34
You have an NFS export in Cloud Volumes Service, but have an application requirement for block access and SCSI-2 reservations. You need to migrate the data to a new iSCSI LUN presented to a Linux server from Cloud Volumes ONTAP. The Linux server is also running an NFS server.
In this scenario, which tool would you use to perform this task?
- A. CloudMirror
- B. Cloud Sync
- C. SnapMirror
- D. Robocopy
Answer: B
NEW QUESTION 35
Which two protocols does a Cloud Volumes Service dual-protocol share support? (Choose two.)
- A. SMB
- B. FC
- C. iSCSI
- D. NFS
Answer: A,D
NEW QUESTION 36
Which two elements should be configured for a VPN connection in AWS? (Choose two.)
- A. customer gateway
- B. NAT gateway
- C. virtual private gateway
- D. Internet gateway
Answer: B,D
Explanation:
Explanation/Reference: https://docs.netapp.com/us-en/occm37/reference_networking_aws.html#a-vpc-with-public-and- private-subnets-and-a-nat-device
NEW QUESTION 37
You deploy a pay-as-you-go instance of Cloud Volumes ONTAP. You have an Issue and try to raise a support case with NetApp, but your instance cannot be found.
In this scenario, what caused this problem?
- A. Your instance has not been linked to your NetApp Support account.
- B. Your instance is tagged to an unsupported availability zone.
- C. Your instance does not have AutoSupport enabled.
- D. Your instance naming convention does not meet standards.
Answer: C
NEW QUESTION 38
Which two elements should be configured for a VPN connection in AWS? (Choose two.)
- A. customer gateway
- B. NAT gateway
- C. virtual private gateway
- D. Internet gateway
Answer: B,D
NEW QUESTION 39
Your customer is using Google Cloud Interconnect to access a StorageGRID S3 bucket from applications running in Google Cloud Platform (GCP). From the private cloud router, the customer can ping any instances behind the GCP Virtual Private Cloud (VPC), but the return traffic is not routed correctly. The private cloud gateway has been defined correctly within GCP.
In this scenario, which network setting should be Investigated to help your customer solve the issue?
- A. the Border Gateway Protocol (BGP) parameters on the private cloud routers
- B. the CIDR blocks configured on the Cloud Interconnect
- C. the VLAN configuration on the private cloud switches
- D. the maximum transfer unit (MTU) settings on the private cloud routers
Answer: B
NEW QUESTION 40
After deploying Cloud Volumes ONTAP in AWS, you notice a high CPU warning that is reported by Amazon CloudWatch.
In this scenario, what should you do?
- A. Upgrade Cloud Volumes ONTAP to the latest version.
- B. Change Amazon Elastic Block Storage (Amazon EBS) disks.
- C. Ignore this warning, the alarm Is not relevant.
- D. Change the instance size to avoid this warning.
Answer: A
NEW QUESTION 41
Why would you want to schedule the shut down and restart of Cloud Volumes ONTAP?
- A. to lower compute costs
- B. to earn Azure credits
- C. to lower capacity costs
- D. to Increase the throughput
Answer: A
NEW QUESTION 42
As the administrator of NetApp Cloud Insights, you want to set up an alert on your on-premises NetApp ONTAP system when a volume reaches 70% full.
In this situation, which two actions are required to accomplish this task? (Choose two.)
- A. Set up an alert.
- B. Monitor the action field in Auditing Events.
- C. Create a Performance Policy.
- D. Create an annotation for volume capacity.
Answer: A,D
NEW QUESTION 43
You are asked to migrate data from Amazon Web Services (AWS) to Azure using Cloud Sync. In this scenario, what is necessary to synchronize between the source and the target?
- A. AWS Data Sync
- B. Data Broker
- C. Transit Gateway
- D. Mediator
Answer: C
NEW QUESTION 44
......
Get ready to pass the NS0-302 Exam right now using our NetApp Certified Exam Package: https://www.briandumpsprep.com/NS0-302-prep-exam-braindumps.html
