Pass Cisco Meraki Solutions Specialist 500-220 exam [Nov 12, 2021] Updated 58 Questions
Cisco 500-220 Actual Questions and 100% Cover Real Exam Questions
Cisco 500-220 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
NEW QUESTION 32
When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)
- A. RADIUS for splash page settings
- B. Captive Portal strength
- C. Simultaneous logins
- D. Controller disconnection behavior
- E. Firewall & traffic shaping
Answer: B,D
NEW QUESTION 33
Which order is accurate for a firmware upgrade on MX appliances in a high-availability configuration?
- A. starts on the primary MX appliance and then occurs on the secondary MX appliance
- B. starts on both MX appliances at the same time and then reboots both appliances after traffic on the primary MX appliance ceases
- C. starts on both MX appliances at the same time and then immediately reboots both appliances
- D. starts on the secondary MX appliance and then occurs on the primary MX appliance
Answer: A
NEW QUESTION 34
Which API endpoint clones a new Organization?
- A. POST /organizations/{organizationId}/clone
- B. POST /organizations/clone/{organizationId}
- C. POST /organizations/{organizationId}/new
- D. PUT /organizations/{organizationId}/clone
Answer: C
NEW QUESTION 35
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?
- A. 802.11r
- B. Dual band operating with Band Steering
- C. Content filtering
- D. Bridge mode
Answer: B
NEW QUESTION 36
Refer to the exhibit.
A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?
- A. The Auto VPN peer "Store 1532 - appliance" is the next hop.
- B. The packet is stopped.
- C. The concentrator gateway (10.128.124.62) is the next hop.
- D. Not enough detail is available to determine the next hop.
Answer: D
NEW QUESTION 37
A customer wants to use Microsoft Azure to host corporate application servers.
Which feature does the customer get by using a vMX appliance rather than connecting directly to Azure by VPN?
- A. next-generation firewall
- B. SD-WAN
- C. malware protection
- D. intrusion prevention
Answer: A
NEW QUESTION 38
A new application needs to be pushed to all iOS devices. Some devices report "NotNow" in the event log and do not install the application.
What does the "NotNow" event indicate?
- A. The device is locked with a passcode.
- B. The device cannot connect to Apple servers.
- C. The device cannot connect to Cisco Meraki servers.
- D. The application requires the most recent iOS version.
Answer: A
NEW QUESTION 39
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?
- A. privacy window
- B. sensor crop
- C. zone exclusion
- D. restricted mode
- E. area or interest
Answer: D
NEW QUESTION 40
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will prefer WAN 1 as it is the primary uplink.
- B. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
- C. WebEx traffic will be load-balanced between both active WAN links.
- D. WebEx traffic will prefer WAN 2 as long as it is up.
Answer: A
NEW QUESTION 41
Refer to the exhibit.
What are two outcomes reflected in the Web App Health application? (Choose two.)
- A. Network #2 had better application performance than Network #1.
- B. Network #2 could not load Google because of a local client misconfiguration.
- C. Neither network recorded any server-side performance issues.
- D. Network #1 could not load Google because of a remote server issue.
- E. Users on both networks may be experiencing issues when attempting to reach Google.
Answer: C,D
NEW QUESTION 42
Which two actions can extend the video retention of a Cisco Meraki MV Smart Camera? (Choose two.)
- A. enabling motion-based retention
- B. configuring a recording schedule
- C. enabling maximum retention limit
- D. enabling audio compression
- E. installing an SSD memory extension
Answer: A,B
NEW QUESTION 43
Which two primary metrics does Meraki Insight use to calculate the Application Performance Score? (Choose two.)
- A. Maximum Latency
- B. Total Bandwidth Usage
- C. Application Response Time
- D. Per-flow Goodput
- E. Maximum Jitter
Answer: C,D
NEW QUESTION 44
Which two features and functions are supported when using an MX appliance in Passthrough mode? (Choose two.)
- A. intrusion prevention
- B. site-to-site VPN
- C. high availability
- D. secondary uplinks
- E. DHCP
Answer: A,B
Explanation:
Reference:
Passthrough_Mode_on_the_MX_Security_Appliance_and_Z-series_Teleworker_Gateway
NEW QUESTION 45
Which information do the MXs in a High Availability pair share?
- A. DHCP association database
- B. time synchronization state
- C. spanning-tree state
- D. stateful firewall database
Answer: C
NEW QUESTION 46
Which Meraki Dashboard menu section is accessed to enable Sentry enrollment on an SSID?
- A. Wireless > Configure > Firewall & Traffic Shaping
- B. Wireless > Configure > Splash page
- C. Wireless > Configure > SSIDs
- D. Wireless > Configure > Access Control
Answer: D
NEW QUESTION 47
Which Cisco Meraki best practice method preserves complete historical network event logs?
- A. Configuring Dashboard logging to preserve only certain event types.
- B. Configuring the preserved event number to maximize logging.
- C. Configuring the preserved event period to unlimited.
- D. Configuring a syslog server for the network.
Answer: B
NEW QUESTION 48
What occurs when a configuration change is made to an MX network that is bound to a configuration template?
- A. The configuration change in the bound network overrides the template configuration.
- B. The more restrictive configuration is preferred.
- C. The template configuration overrides the configuration change in the bound network.
- D. The configuration change in the bound network is combined with the template configuration inside the template.
Answer: D
Explanation:
Reference:
Managing_Multiple_Networks_with_Configuration_Templates
NEW QUESTION 49
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.
Answer:
Explanation:
NEW QUESTION 50
Refer to the exhibit.
What are the Loss and Average Latency statistics based on?
- A. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
- B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
- C. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
- D. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
Answer: C
NEW QUESTION 51
Refer to the exhibit.
Which outcome occurs when logging is set to Enabled?
- A. The hits counter within this section is now enabled.
- B. Inbound flows are sent to a configured syslog server if a syslog server configured for flows.
- C. This firewall rule is now enabled.
- D. Outbound flows are sent to a configured syslog server if a syslog sender is configured for flows.
Answer: B
NEW QUESTION 52
How is high-availability supported for Cisco Meraki devices?
- A. The MX Security Appliances and MS Series Switches that use HSRP support an active/passive high- availability pair.
- B. An active/active high-availability pair is recommended for MX Security Appliances.
- C. Only the MX Security Appliances that use VRRP support high availability.
- D. The MX Security Appliances and MS Series Switches that use VRRP support an active/passive high- availability pair.
Answer: C
Explanation:
Reference:
_High_Availability_Pair
NEW QUESTION 53
What happens to an unsupervised iOS device when the "Meraki management" profile is removed?
- A. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed are also removed.
- B. The "Meraki management" profile is removed and then pushed automatically by Systems Manager.
- C. The "Meraki management" profile cannot be removed.
- D. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed remain.
Answer: A
NEW QUESTION 54
......
Cisco 500-220 Real 2021 Braindumps Mock Exam Dumps: https://www.briandumpsprep.com/500-220-prep-exam-braindumps.html
500-220 Free Exam Questions & Answers PDF Updated on Nov-2021: https://drive.google.com/open?id=1CRfXwtrq-yBvMc1CN-XpKeKQTAUlarFP
