Pass Avaya 72201X Exam With Practice Test Questions Dumps Bundle [Q34-Q53]

Share

Pass Avaya 72201X Exam With Practice Test Questions Dumps Bundle

2023 Valid 72201X test answers & Avaya Exam PDF

NEW QUESTION # 34
A customer reports that several Remote Worker new hires were trying to call co-workers in the office, but noticed their feature buttons were not working. After running a SIP trace, the administrator did not see any PPM Responses coming from Avaya Aura Session Manager (SM).
After looking at how the call flow is supposed to go, the administrator looked at the SIP communication profile and saw that CM had not been administered as a sequenced application.
If CM had been added to the endpoint's SIP Communication Profile as a Sequenced Application, which step was missing in the call flow?

  • A. PPM is downloaded to Avaya Aura Session Manager (SM) from CM.
  • B. PPM is downloaded to the Remote Worker telephone from Avaya Aura System Manager (SMGR).
  • C. PPM is downloaded to the Remote Worker telephone from CM.
  • D. None of the above.
  • E. PPM is downloaded to the Remote Worker telephone from Avaya Aura Session Manager (SM) via Avaya Session Border Controller for Enterprise (SBCE).

Answer: E


NEW QUESTION # 35
From which website can you obtain resources such as Product Change Notifications (PCNs), Documentation, Knowledge-based articles and make Parts/Service requests?

  • A. avaya-learning.com
  • B. avaya.com
  • C. support.avaya.com
  • D. plds.avaya.com

Answer: C


NEW QUESTION # 36
In a SIP trace capturing PPM messages, which device sends the getCallHistory PPM request, and what is it requesting?

  • A. the SIP endpoint; It is requesting its call log to be retrieved from Session Manager.
  • B. Communication Manager; It is requesting the call log history from System Manager.
  • C. the SIP endpoint; It is requesting its contact list to be retrieved from Session Manager.
  • D. the Avaya Aura Session Manager (SM) server; It is requesting the call history from System Manager.
  • E. System Manager; It is requesting the call log history from Communication Manager.

Answer: A


NEW QUESTION # 37
An IP (AST) user 1011111 and H.323 user 1011711 share a common Communication Manager (Evolution) server. Given the following actions:
CM will negotiate the codec for the H.323 endpoint based on CM configuration.
Session Manager verifies SIP user 1011111 in the registry and authenticates it. After authenticating the SIP user, Session Manager checks the SIP user's profile for sequence applications and routes the request to Communication Manager.
Communication Manager performs feature processing and terminates the call to the H.323 endpoint. If SIP user 1011111 calls H.323 user 1011711, in which order will these actions take place?

  • A. 4, 2, 1, 3
  • B. 4, 2, 3, 1
  • C. 2, 4, 1, 3
  • D. 4, 3, 2, 1
  • E. 3, 4, 2, 1

Answer: B


NEW QUESTION # 38
Which statement desribes the steps to save the traceSM log file?

  • A. Execute traceSM -w <filename>.
  • B. Export all logs from the Avaya Aura System Manager (SMGR) log viewer.
  • C. While traceSM is running, type 'w' and a filename; the file is written to the user's current directory.
  • D. While traceSM is running, type 'w' and a filename; the file is written to the /tmp directory.

Answer: A


NEW QUESTION # 39
How can an inactive SM100 be reset?

  • A. Use the SMGR web interface to reset the SM100 by navigating to Services > Security > Security Module.
  • B. Click the repair button on the Replication page with the affected Avaya Aura Session Manager (SM) selected.
  • C. Click the 'Reset' button on the Security Module Status page in Avaya Aura System Manager (SMGR).
  • D. Restart Services on the Avaya Session Border Controller for Enterprise (SBCE).
  • E. Run the reboot SM100 command from RHEL Command Line Interface of Avaya Aura System Manager (SMGR).
  • F. Run the resetSM100 command from RHEL Command Line Interface of Avaya Aura Session Manager (SM)

Answer: A


NEW QUESTION # 40
Which three statements regarding Full and Half call model processing are true? (Choose three.)

  • A. Avaya Aura Communication Manager (CM) configured as an Evolution Server performs Full call model processing.
  • B. CM performs Half call model processing when it acts as a SIP user agent.
  • C. CM performs Full call model processing when it acts as a SIP registrar.
  • D. Avaya Aura Session Manager (SM) always performs Half call model processing.
  • E. Avaya Aura Session Manager (SM) always performs Full call model processing.
  • F. Avaya Aura Communication Manager (CM) configured as a Feature Server performs Full call model processing.

Answer: B,D,F


NEW QUESTION # 41
What are two functions performed by System Manager? (Choose two.)

  • A. It provides SIP registration and authentication.
  • B. It delivers a set of shared management services and a common console.
  • C. It provides centralized management of enterprise-wide dial plans.
  • D. If 'Initial IP-IP Direct Media' is enabled, SIP-SIP two party calls will use direct media.
  • E. If 'Direct IP-IP Auto Connections, H.323-H.323 two-party calls will shuffle to establish a direct media.

Answer: B,C


NEW QUESTION # 42
A SIP station to SIP station call on a single Feature or Evolution Server uses four signaling legs between CM and SM (not including the initial off-hook imsorig). When does Communication Manager insert the shortcut flag during call processing?

  • A. during the routing phase (imsroute) of call processing
  • B. during the origination phase (imsorig) of call processing
  • C. during the termination phase (imsterm) of call processing
  • D. during the initialization phase (imsinit) of call processing
  • E. during the dialing analysis phase (imsdialana) of call processing

Answer: B


NEW QUESTION # 43
A customer calls Avaya Support stating their Session Manager (SM) is down. After doing some troubleshooting, the technician sees SM is in the Deny New Service state, and in Restricted license mode.
What does the Restricted license mode indicate in this scenario?

  • A. The SM license is not accessible or does not exist.
  • B. There is a license error but SM continues to function.
  • C. The license was installed incorrectly.
  • D. The license 30 day grace period has expired and SM service is being denied.
  • E. The SM has exceeded the license capacity and is operating in restricted mode.

Answer: D


NEW QUESTION # 44
When retrieving a message from Avaya Aura Messenger (AAM), what is the purpose of the RE-INVITE message?

  • A. The RE-INVITE message is sent to establish a media path for the message retrieval process.
  • B. The RE-INVITE message is used to authenticate the user before message retrieval can begin.
  • C. The RE-INVITE message is used to retry the initial INVITE message if it was not transmitted successfully.
  • D. The RE-INVITE message is sent to connect the voice port to the caller.

Answer: A


NEW QUESTION # 45
Which Communication Manager command can be used to verify the Network Region in use by a particular en endpoint?

  • A. display system-parameters ip-options
  • B. list usage extension
  • C. display ip-network region
  • D. status station

Answer: D


NEW QUESTION # 46
Which Linux command allows you to view the installed certificates on Avaya Aura Communication Manager (CM)?

  • A. show certs
  • B. tlscertmanage
  • C. displaycertificates
  • D. start certmanager -f

Answer: B


NEW QUESTION # 47
When running the display node-names ipcommand, what information is found?

  • A. type and link number
  • B. IP address and type
  • C. name and IP address
  • D. name and link number

Answer: C


NEW QUESTION # 48
Which trouble-shooting tool can be used to investigate PPM issues?

  • A. list trace station
  • B. list trace tac
  • C. traceSM
  • D. SIP tracer_asset log

Answer: C


NEW QUESTION # 49
A customer calls Avaya support after their telecom administrator was unable to add 50 new telephones for new hires. Avaya support determines that the number of telephone exceeds the capacity that the system supports.
Which pre-installation step was omitted and therefore caused this problem?

  • A. Checking the required number of SIP trunks
  • B. Providing accurate licensing specifications
  • C. Verifying the version installed is compatible with existing versions
  • D. Accessing support.avaya.com to verify customer systems compatibility

Answer: B


NEW QUESTION # 50
Which statement is true about Interfaces and IP addresses on an Avaya Session Border Controller for Enterprise (SBCE) used for SIP Trunking and Remote Worker services?

  • A. SIP Trunking and Remote Worker services can use different IP addresses configured on the same Interface.
  • B. SIP Trunking and Remote Worker services cannot run on the same SBCE.
  • C. Only one IP address should be configured per interface.
  • D. SIP Trunking and Remote Worker services can share the same IP address.

Answer: A


NEW QUESTION # 51
Which three SIP requests are used to allow an AST endpoint to use features provided by an Avaya Aura Communication Manager (CM)? (Choose three.)

  • A. REGISTER
  • B. OPTIONS
  • C. NOTIFY
  • D. SUBSCRIBE
  • E. INVITE
  • F. CANCEL

Answer: B,C,D

Explanation:
Explanation
Source: https://downloads.avaya.com/css/P8/documents/100182495


NEW QUESTION # 52
You notice that the Entity_Link between your Session Manager and Communication Manager is down.
From Communication Manager, which four commands can be used to verify the health of this SIP link?
(Choose four.)

  • A. Show entity-links
  • B. Status signaling group
  • C. List network-interfaces
  • D. Status trunk
  • E. Status health
  • F. List trace station
  • G. Display link-monitoring
  • H. statapp

Answer: A,B,D,F


NEW QUESTION # 53
......

Top Avaya 72201X Courses Online: https://www.briandumpsprep.com/72201X-prep-exam-braindumps.html

Free Avaya 72201X Exam Questions and Answer from Training Expert BraindumpsPrep: https://drive.google.com/open?id=1n_wL1TEyQXZsMNX2anPt4AvqRif1l8sF