(PDF) Microsoft Certified: Power Platform Developer Associate PL-400 Exam and Certification Test Engine
Use PL-400 Exam Dumps (2021 PDF Dumps) To Have Reliable PL-400 Test Engine
Difficulty in Writing Microsoft PL-400: Microsoft Power Platform Developer Exam
Microsoft PL-400: Microsoft Power Platform Developer is a privileged achievement one could be graced with. But adverse to general notion certifying with Microsoft is not that challenging if the candidates have proper preparation material to pass the Microsoft PL-400: Microsoft Power Platform Developer exam with good grades. Questions answers and clarifications which are designed in form of BraindumpsPrep dumps make sure to cover the entire course content. BraindumpsPrep have a brilliant Microsoft PL-400: Microsoft Power Platform Developer dumps with most recent and important questions and answers in PDF files. BraindumpsPrep is sure about the exactness and legitimacy of Microsoft PL-400: Microsoft Power Platform Developer dumps and in this manner. Candidates can easily pass the Microsoft PL-400: Microsoft Power Platform Developer exam with genuine Microsoft PL-400: Microsoft Power Platform Developer dumps and gets MICROSOFT certification. These dumps are viewed as the best source to understand the Microsoft PL-400: Microsoft Power Platform Developer well by simply pursuing examples questions and answers. If a candidate completes practice the exam with certification PL-400 dumps pdf along with self-assessment to get the proper idea on MICROSOFT accreditation and to ace the certification exam.
Microsoft PL-400: Microsoft Power Platform Developer Exam Certified Professional salary
The average salary of a Microsoft PL-400: Microsoft Power Platform Developer Exam Certified Expert in
- England - 90,532 POUND
- United State - 120,000 USD
- India - 20,00,327 INR
- Europe - 90,547 EURO
NEW QUESTION 76
A university manages grant applications using a model-driven app.
Users report that the message on the Grant Application screen is outdated. The screen shows the following:
Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://www.loganconsulting.com/blog/how-use-power-automate-trigger-workflows-microsoft-dynamics-crm/
NEW QUESTION 77
An organization plans to set up a secure connector for Power Apps. The App will capture tweets from Twitters about the organization's upcoming product for sales follow-up.
You need to configure security for the app.
Which authentication method should you use?
- A. Windows authentication
- B. Kerberos authentication
- C. API key
- D. Basic authentication
- E. OAuth
Answer: E
Explanation:
Configure OAuth2 provider settings for portals.
The OAuth 2.0 based external identity providers involve registering an "application" with a third-party service to obtain a "client ID" and "client secret" pair.
The supported providers are:
Microsoft Account
Twitter
Facebook
Google
LinkedIn
Yahoo
Reference:
https://docs.microsoft.com/en-us/powerapps/maker/portals/configure/configure-oauth2-settings
NEW QUESTION 78
You create a Power Virtual Agents chatbot in an environment named Environment1. A colleague creates a Power Automate flow in the default solution in the default environment.
The chatbot in Environment1 does not recognize the flow in the default environment.
You need to ensure the chatbot can access the flow.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Export the solution from the default environment and import the solution into Environment1.
- B. Add the Power Automate flow to a solution in Environment1.
- C. Send a copy of the Power Automate flow from the default environment.
- D. Share the Power Automate flow from the default environment.
- E. Add the Power Automate flow to a solution in the default environment.
Answer: B,D
Explanation:
E: The flow needs to be shared as it was created by another person.
A: To be available to your bots, flows must be stored in a solution in Power Automate. If you do not want to use the Default Solution for this purpose, you can move your flows to another solution.
Incorrect Answers:
C: The flow is already in the default solution in the default environment.
D: You move the flow, not export and import the solution.
Reference:
https://docs.microsoft.com/en-us/power-virtual-agents/environments-first-run-experience
NEW QUESTION 79
A company uses SharePoint for its intranet and other functions. The company has also implemented model-driven apps.
SharePoint users must be able to create contact records in the Common Data Service (CDS), without having to navigate to the model-driven apps.
You need to create a link in SharePoint to open the CDS contact from displaying data from SharePoint.
How should you complete the URL? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
https://contoso.crm.dynamics.com/main.aspx?etn=contact&extraqs=param_1%3D&pagetype=entityrecord Reference:
https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/open-forms-views-dialogs-reports-url
https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/set-field-values-using-parameters-passed-form
NEW QUESTION 80
You are creating an integration that uses an Azure function to create records in the Common Data Service when leads are submitted from your company website.
You create and configure a Common Data Service application user.
You do not have administrator access to the Common Data Service environment you are using for access to Azure Active Directory. Company policy dictates that service accounts must be used for integrations, and integrations must not be granted privileges beyond what is needed.
You need to recommend actions that an administrator should perform to configure access for the Azure Function.
Which three actions should you perform? Each correct selection presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Grant the application delegated permissions to the Dynamics CRM API in Azure Active Directory.
- B. Create an application registration in Azure Active Directory.
- C. Assign the system administrator security role to the application user.
- D. Create a new security role with the minimum required permissions and assign to the application user.
- E. Deploy Azure B2B guest permissions to the application user.
- F. Assign the Power Platform administrator role to the application user in Azure Active Directory.
Answer: A,B,D
Explanation:
Reference:
https://docs.microsoft.com/en-us/powerapps/developer/common-data-service/walkthrough-register-app-azureacti
NEW QUESTION 81
A company delivers packages to businesses and consumers. A custom entity named Package captures the package details.
You need to add the following sets of fields to the entity and leverage the built-in operations of the platform:
A set of fields to represent the package length, width, depth, and weight. The maximum value for any dimension is 100 centimeters.
A set of fields for time-sensitive attributes to calculate the efficiency of a delivery based on when the delivery is entered in the system and the existing custom fields: Pickup time and Delivery time.
Which constructs should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powerapps/maker/common-data-service/define-calculated-fields
NEW QUESTION 82
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A Common Data Service (CDS) environment has two custom entities named Building code and Work item. Building code has a code date custom field and Work item has an elapsed time custom field. Construction workers use a consolidated custom form with data from both entities to fill.in their daily work items.
A JavaScript library is used with these custom entities and fields to apply complex logic.
You need to ensure that the JavaScript library continues to function as originally designed if other developers expand the environment.
Solution: In form properties of the consolidated form, add the JavaScript library in the events tab and add the two custom fields to the dependent fields section of the non-event dependencies tab.
Does the solution meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Instead, in the JavaScript library, add Building code with Code date and Work item with Elapsed time in the dependencies tab.
Reference:
https://docs.microsoft.com/en-us/dynamics365/customerengagement/on-premises/developer/web-resource-dependencies
NEW QUESTION 83
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A Common Data Service (CDS) environment has two custom entities named Building code and Work item.
Building code has a code date custom field and Work item has an elapsed time custom field. Construction workers use a consolidated custom form with data from both entities to fill.in their daily work items.
A JavaScript library is used with these custom entities and fields to apply complex logic.
You need to ensure that the JavaScript library continues to function as originally designed if other developers expand the environment.
Solution:
* In the Building code form, add the JavaScript library in the events tab and the Code date field to the non-event dependencies.
* In the Work item form, add the JavaScript library in the Events tab and the Elapsed time field to the non-event dependencies.
Does the solution meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Explanation
Instead, in the JavaScript library, add Building code with Code date and Work item with Elapsed time in the dependencies tab.
Reference:
https://docs.microsoft.com/en-us/dynamics365/customerengagement/on-premises/developer/web-resource-depen
NEW QUESTION 84
You need to select the appropriate methods using the Azure Event Grid.
Which method should you use for each requirement? To answer, drag the appropriate methods to the correct requirements. Each method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/event-grid/overview
NEW QUESTION 85
The communication department for a company plans to add a publicly accessible survey page to the company's public website.
You must add the new survey page to the company's public website and capture data from the page to a Common Data Service environment.
Explicit user credentials must not be required to write survey data to Common Data Service.
You need to implement authentication.
Which authentication mechanism should you implement?
- A. Claims-based
- B. X.509 certificate
- C. OAuth2.0
- D. Microsoft 365
Answer: C
Explanation:
OAuth is the preferred means to authenticate because it provides access to both the OData RESTful web services (Web API and OData global Discovery service) as well as to the SOAP web services (Organization service and Discovery service).
OAuth is also required to support:
Azure Active Directory configurations for conditional access, such as Two-factor Authentication (2FA) Use of client secrets to enable server-to-server authentication scenarios.
Cross-Origin Resource Sharing (CORS) to connect a Single-page Application (SPA) Incorrect Answers:
A: Using Microsoft 365 authentication does not require that your register your applications as OAuth does. You must simply provide a User Principal Name (UPN) and password for a valid user.
Reference:
https://docs.microsoft.com/en-us/powerapps/developer/data-platform/authentication
NEW QUESTION 86
You are creating a flow using the Common Data Service (CDS) connector.
You need to select the appropriate triggers.
Which triggers should you use? To answer, drag the appropriate triggers to the correct scenarios. Each trigger may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 87
You work for a multinational company that has Azure and Common Data Service environment in the United States (UTC-7) and Japan (UTC+9).
You create Azure Functions for each location to update key data.
You need to configure the functions to run at 4:00 AM on weekdays at each location.
Which schedule formats should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/azure-functions/functions-bindings-timer?
NEW QUESTION 88
A company uses SharePoint for its intranet and other functions. The company has also implemented model-driven apps.
SharePoint users must be able to create contact records in the Common Data Service (CDS), without having to navigate to the model-driven apps.
You need to create a link in SharePoint to open the CDS contact from displaying data from SharePoint.
How should you complete the URL? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
https://contoso.crm.dynamics.com/main.aspx?etn=contact&extraqs=param_1%3D&pagetype=entityrecord Reference:
https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/open-forms-views-dialogs-reports-url
https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/set-field-values-using-parameters-passed-form
NEW QUESTION 89
A company needs to illustrate the relationships of the entities in Dynamics 365 Sales.
You need to select the appropriate tool to show this graphic.
Which tool should you select?
- A. Security model
- B. Sales Insights
- C. Metadata diagram
- D. Power Automate
Answer: C
NEW QUESTION 90
A company has two development instances, two test instances, two staging instances, and one production instance.
The test team reports connection issues with the test and staging instances.
You need to identify which if the instances the testing team currently has access.
Which two URLs can you use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. https://disco.crm.dynamics.com/api/discovery/v9.1/
- B. https://dev.crm.dynamics.com/api/discovery/v9.1/Instances
- C. https://dev.crm.dynamics.com/api/discovery/v9.1/Instances(UniqueName='myorg')
- D. https://globaldisco.crm.dynamics.com/api/discovery/v9.1/Instances
- E. https://myorg.api.crm.dynamics.com/api/data/v.9.1/
Answer: C,D
Explanation:
C: Organization information is stored in the Instance entity of the Discovery service. To see the kind of information contained in that entity, send an HTTP GET request to the service for one of your instances.
GET Error! Hyperlink reference not valid.
In the above example, the discovery service is used to obtain the organization information of the instance with a unique name of "myorg".
Reference:
https://docs.microsoft.com/en-in/dynamics365/customerengagement/on-premises/developer/webapi/discover-url-organization-web-api
https://docs.microsoft.com/en-us/powerapps/developer/common-data-service/webapi/samples/global-discovery-service-csharp
NEW QUESTION 91
You need to resolve the performance issue with the Total Billed customer plug-in.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Attach the debugger to total billed customer time.
2 - Run the total billed customer time query.
3 - Correct the failing plug-in code and compile.
4 - Register and deploy the plug-in assembly
5 - Unregister the old version of the....
Reference:
https://docs.microsoft.com/en-us/dynamics365/customerengagement/on-premises/developer/register-deploy-plugins
NEW QUESTION 92
An organization has a Dynamics 365 Sales environment. In the development environment, you create a business rule named BusinessRule1 on the Account entity. You deploy BusinessRule1 to production as part of a managed solution.
You need to remove BusinessRule1 from the production environment.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Reference:
https://www.inogic.com/blog/2016/01/solution-management-with-dynamics-crm-2016/
NEW QUESTION 93
You need to select a process to create each function.
Which process should you use? To answer, drag the appropriate processes to the correct functions. Each process may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/power-automate/
https://docs.microsoft.com/en-us/dynamics365/customerengagement/on-premises/customize/create-business-rules-recommendations-apply-logic-form
https://docs.microsoft.com/en-us/power-automate/business-process-flows-overview
NEW QUESTION 94
A company is creating a new system based on the Common Data Service (CDS).
You need to select the CDS features that meet the company's requirements.
Which features should you select? To answer, drag the appropriate features to the correct requirements. Each feature may be used once, more than once, or not at all. You may needs to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
1. Parental : Any action taken on a record of the parenttable is also taken on the related child table records.
2. Cascade user owned: Perform the action on all referencing entity records owned by the same user as the referenced entity.
3.Referential: Any related records can be navigated to, and actions taken on one will not affect the other.
NEW QUESTION 95
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than once correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are designing a one-way integration from the Common Data Service to another system.
You must use an Azure Function to update the other system. The integration must send only newly created records to the other system. The solution must support scenarios where a component of the integration is unavailable for more than a few seconds to avoid data loss.
You need to design the integration solution.
Solution: Register a service endpoint in the Common Data Service that connects to an Azure Service Bus queue.
Register a step at the endpoint which runs asynchronously on the record's Create message and in the portoperation stage.
Configure the Azure Function to process records as they are added to the queue.
Does the solution meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
Microsoft Dataverse supports integration with Azure.
For the Dataverse and Azure connection to work, there must be at least one solution in an Azure Service Bus solution account, where the solution contains one or more service endpoints.
For a queue endpoint contract, a listener doesn't have to be actively listening.
Reference:
https://docs.microsoft.com/en-us/powerapps/developer/common-data-service/azure-integration
NEW QUESTION 96
You need to improve warehouse counting efficiency.
What should you create?
- A. A Power BI dashboard that shows the inventory counting variances
- B. a flow that updates the warehouse counts as the worker performs the count
- C. a canvas app that scans barcodes to allow a warehouse worker to select inventory counts
- D. a model-driven app that allows the user to key in inventory counts
Answer: C
Explanation:
Explanation
Scenario: Warehouse counting is performed manually by using a counting journal. All warehouse boxes and items are barcoded.
NEW QUESTION 97
A company plans to replicate a Dynamics 365 Sales database into an Azure SQL Database instance for reporting purposes. The data Export Service solution has been installed.
You need to configure the Data service.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Enable change tracking for all entities that must be replicated to Azure SQL Database.
- B. Enable auditing entities that must be replicated to Azure SQL database.
- C. Set up server-based integration.
- D. Create an export profile that specifies all the entities that must be replicated.
- E. Create an Azure SQL Database service in the same tenant as the Dynamics 365 Sales environment.
Answer: A,D,E
Explanation:
Reference:
https://docs.microsoft.com/en-us/power-platform/admin/replicate-data-microsoft-azure-sql-database
NEW QUESTION 98
A company has a model-driven app that captures applications from prospective students.
You are asked to create a new re-usable custom component using the Power Apps component framework (PCF).
The custom component must allow entry of a date of birth and validate that the applicant is not a minor.
You create the class AuditDatePicker in the TypeScript file Index.ts and the style sheet DatePicker.css.
You need to define the component to be available only for relevant fields and its properties when used in a form.
How should you complete the manifest? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powerapps/developer/component-framework/manifest-schema-reference/manifest
https://docs.microsoft.com/en-us/powerapps/developer/component-framework/implementing-controls-using-typescript
NEW QUESTION 99
An organization implements Dynamics 365 Sales.
You need to trigger a business rule when the main form in saved.
What should you do?
- A. Set the scope of the business rule to Entity.
- B. Write a business rule to trigger on a change of ModifiedOn field.
- C. Set the scope of the business rule to one specific form where business rule triggers.
- D. Set the scope of the business rule to All Forms.
Answer: A
Explanation:
Explanation
Set scope of business rule to "Entity" instead of "All Form". This will trigger it on server side.
Reference:
https://docs.microsoft.com/en-us/previous-versions/dynamicscrm-2016/developers-guide/dn481574(v=crm.8)
NEW QUESTION 100
......
PL-400 Dumps Full Questions with Free PDF Questions to Pass: https://www.briandumpsprep.com/PL-400-prep-exam-braindumps.html
PL-400 PDF Recently Updated Questions Dumps to Improve Exam Score: https://drive.google.com/open?id=19gn6O3Sk11V7wBgmRG1ocwSGcwQwG67e
