[Jan-2022] Pass Network Appliance NS0-175 Tests Engine pdf - All Free Dumps
Cisco and NetApp FlexPod Design Specialist Practice Tests 2022 | Pass NS0-175 with confidence!
NetApp NS0-175 Exam Topics:
| Section | Objectives |
|---|---|
| Tools | - Describe resources for determining supported FlexPod components - Demonstrate knowledge of using tools for managing FlexPod - Demonstrate knowledge of troubleshooting methodologies for FlexPod solutions |
| Security | - Describe access control methods for FlexPod solutions - Describe the considerations in building a secure multitenancy design |
| Flexpod Design | - Describe FlexPod components based upon customer workloads - Describe how to size a solution based on customer requirements in accordance with FlexPod best practices - Describe the support options for FlexPod |
| Networking | - Describe Cisco networking components used within FlexPod designs - Demonstrate knowledge of FlexPod networking configurations |
NEW QUESTION 101
Which two statements are correct regarding how the VM-FEX feature extends Cisco fabric technology to a virtual machine? (Choose two.)
- A. VM-FEX ports can operate in 10 different modes.
- B. The server adapter is divided into a single vNIC.
- C. All virtual machine traffic is sent directly to the dedicated interface on the switch.
- D. Each virtual machine includes a dedicated interface on the parent switch.
Answer: C,D
NEW QUESTION 102
A customer with a FlexPod Datacenter solution wants to enable user access on UCS Manager.
In this scenario, which three authentication methods would be configured? (Choose three.)
- A. NetBIOS
- B. LDAP
- C. Active Directory
- D. Local
- E. Workgroup
Answer: A,C,D
NEW QUESTION 103
A partner wants to develop a FlexPod Datacenter solution for a customer that will use Cisco ACI.
In contrast to a FlexPod solution with NX-OS, which two additional requirements must be satisfied? (Choose two.)
- A. Use two Cisco Application Policy Infrastructure Controllers (APICs)
- B. Deploy the Cisco Nexus 900 Series Switches in a core-edge topology
- C. Deploy the Cisco Nexus 900 Series Switches in a leaf-spine topology
- D. Use three Cisco Application Policy Infrastructure Controllers (APICs)
Answer: A,C
NEW QUESTION 104
Which statement is true about the capabilities of Cisco UCS Manager?
- A. It provides policy-driven management to programmatically control server, network, and storage resources.
- B. It uses only manual discovery to detect, inventory, manage, and provision system components.
- C. It supports Cisco UCS B-Series blades and not C-Series rack servers.
- D. It manages servers up to 50 blades per UCS domain.
Answer: C
NEW QUESTION 105
Cisco UCS Manager may be used to manage which four tasks within a Cisco UCS domain? (Choose four)
- A. Deploy patches for software, such as an OS or an application
- B. Cisco UCS resource management including WWN addresses, MAC addresses, UUIDs, and bandwidth
- C. Deployment of a Windows or Linux Operating system
- D. Management of non-Cisco x86 systems
- E. Network administration such as creating VLANs, uplink ports, port channels and LAN PIN groups
- F. Install software applications, such as databases, application server software, or web servers
- G. Cisco UCS hardware including the chassis, servers, fabric interconnects, and i/o modules
- H. SAN configuration tasks such as creating VSANs, QoS classes and definitions, and port channels.
Answer: B,E,G,H
NEW QUESTION 106
An administrator is designing a FlexPod backup solution that includes replication to a remote site that includes the capability to restore to a prior point in time.
In this scenario, which two technologies are required to accomplish this task? (Choose two.)
- A. NetApp SnapRestore
- B. NetApp FlexClone
- C. NetApp SnapMirror
- D. NetApp SyncMirror
Answer: A,C
NEW QUESTION 107
What syntax is used to get an extensive help definition for a particular command?
- A. help [command]
- B. [command] help
- C. command ?
- D. ?
Answer: A
NEW QUESTION 108
Which two support account levels are minimally required when you deploy a FlexPod Datacenter solution?
(Choose two.)
- A. Cisco SmartNet Total Care 24x7x4
- B. NetApp SupportEdge Expert NBD
- C. Cisco Solution Support 24x7x4
- D. NetApp SupportEdge Advisor 24x7x4
Answer: C,D
NEW QUESTION 109
Refer to the exhibit.
The numerals in the red rectangle, what will be this servers Boot from SAN order?
- A. 3, 4, 1, 2
- B. Not enough information
- C. 1, 2, 3, 4
- D. 1, 3, 2, 4
Answer: B
NEW QUESTION 110
The FlexPod Data Center with VMware vSphere 5.1 solution utilizes a clustered file system that allows multiple hosts simultaneous read and write access to a single volume.
What is the name of this file system?
- A. NTFS
- B. FAT
- C. VHDX
- D. VMFS
Answer: D
NEW QUESTION 111
You are asked to evaluate SaaS-based monitoring solutions for your FlexPod environment. Other than being SaaS-delivered, selection criteria include full lifecycle management, environment automation, and the ability to monitor third-party storage that is salted for retirement.
In this scenario, which product satisfies the requirements?
- A. NetApp OnCommand Insight
- B. Cisco Intersight
- C. NetApp Cloud Insights
- D. Cisco UCS Manager
Answer: C
NEW QUESTION 112
Which one of the following access methods will maintain boot messages across reboots?
- A. SSH
- B. Console
- C. RSH
- D. Telnet
Answer: B
NEW QUESTION 113
Refer to the exhibit.
Following FlexPod recommended practices, which portchannel configuration is valid for the connectivity shown?
- A. A and B. portchannel 1C and D. vpc 2E and F. vpc 2G and H. portchannel 4I and J. vpc 11K and L. vpc 11
- B. A and B. po1 and vpc 1C and D. po2 and vpc 2E and F. po3 and vpc 3G and H. po4 and vpc 4I and J. po11 and vpc 11K and L. po12 and vpc 12
- C. A and B. vpc 1C and E. po2 and vpc 2D and F. po3 and vpc 3G and H. vpc 4I and K. po11 and vpc 11J and L. po12 and vpc 12
- D. A and B. portchannel 1C and D. po2 and vpc 2E and F. po3 and vpc 3G and H. portchannel 4I and J. po11 and vpc 11K and L. po12 and vpc 12
- E. A and B. portchannel 1C and E. po2 and vpc 2D and F. po3 and vpc 3G and H. portchannel 1I and K. po11 and vpc 11J and L. po12 and vpc 12
Answer: E
NEW QUESTION 114
State whether the following statement is true or false. The NOW site holds data maintained by the Network Appliance. This information consists of records and customer product information but this data is only available to authorized users.
- A. True
- B. False
Answer: A
NEW QUESTION 115
Which three statements are true about a NetApp Storage Virtual Machine? (Choose three.)
- A. A Storage Virtual Machine is a logical construct that represents a set of physical resources of the cluster and owns resources only from its designated HA controller pair.
- B. Storage Virtual Machines must use either local authentication or Active Directory Authentication for user access and roles.
- C. Multiple volumes from within a Storage Virtual Machine can be combined v to form a single NAS namespace.
- D. iSCSI, FC, and FCoE are all supported block protocols for Storage Virtual Machines.
- E. A Storage Virtual Machine is only aware of the resources assigned to it se and has no knowledge of other Storage Virtual Machines and their respective resources.
Answer: A,B,D
NEW QUESTION 116
A customer wants to deploy a FlexPod Datacenter solution in a limited amount of rack space. After planning for the networking and storage devices required for the deployment, they realize they have six rack units of space remaining. They need to install as many servers as possible in this available rack space.
In this scenario, which solution allows them to accomplish their objective?
- A. eight Cisco UCS B200 M5 blade servers
- B. six Cisco UCS C220 M5 rack servers
- C. three Cisco UCS C4200 rack servers
- D. four Cisco UCS B480 M blade servers
Answer: A
NEW QUESTION 117
A customer is designing a FlexPod solution that must satisfy the requirements shown below:
have disaster recovery to an alternative data center,
must have continuous replication of data for a database,
must leverage a 100Gbps capable switch,
have a maximum distance of 700 km.
In this scenario, which two components would be used to satisfy the requirements? (Choose two.)
- A. Cisco MDS 9132T
- B. MetroCluster FC
- C. MetroCluster IP
- D. Cisco Nexus 3232C
Answer: B,C
NEW QUESTION 118
A customer wants to add 40 Gbps networking capabilities to a FlexPod Datacenter 10 Gbps environment.
Which two Cisco components support this speed? (Choose two.)
- A. Cisco Nexus 3550-F
- B. Cisco UCS 1440 VIC
- C. Cisco Nexus 9504
- D. Cisco UCS 1455 VIC
Answer: A,B
NEW QUESTION 119
Which two statements are true about VXLAN configured on Cisco Nexus 9000 Series switches operating in NX-OS mode? (Choose two.)
- A. VXLAN is only supported on Cisco Nexus 9000 Series switches.
- B. VXLAN segments are independent of the underlying network topology.
- C. VXLAN supports the Spanning Tree Protocol for loop prevention.
- D. VXLAN is a Layer 2 overlay scheme over a Layer 3 network.
Answer: B,D
NEW QUESTION 120
A customer wants a FlexPod solution that is designed for high performance applications and that will support
32 Gbps Fibre Channel block storage.
In this scenario, which two components should you recommend to the customer? (Choose two.)
- A. Cisco Nexus 93180YC-FX
- B. NetApp AFF C190
- C. NetApp AFF A800
- D. Cisco Nexus 9504
Answer: A,C
NEW QUESTION 121
When configuring a FlexPod environment for iSCSI boot with Cisco UCS, which item should be preconfigured?
- A. All zoning should be configured
- B. IQN and IP address of target
- C. WWPN Pools
- D. Zonesets should be created
Answer: B
NEW QUESTION 122
Which Cisco UCS Fabric Interconnect model has multiple 100 Gbps ports available for use?
- A. Cisco UCS 6454
- B. Cisco UCS 6324
- C. Cisco UCS 6332
- D. Cisco UCS 6332-16UP
Answer: A
NEW QUESTION 123
......
Online Exam Practice Tests with detailed explanations!: https://www.briandumpsprep.com/NS0-175-prep-exam-braindumps.html
