HQT-4180 Exam Dumps - PDF Questions and Testing Engine
HQT-4180 Dumps - The Sure Way To Pass Exam
NEW QUESTION # 43
Which two statements are correct when adding cache to a VSP E590? (Choose two.)
- A. Cache Modules must be installed on the CM board.
- B. This is not supported online.
- C. CMG0 and CMG1 must have the same DIMM type.
- D. Cache modules must be installed in CMG1.
Answer: C,D
NEW QUESTION # 44
In the VSP Midrange family, which module provides power to the Cache Flash Memory (CFM) and to the cache in case of a power outage?
- A. Power Module
- B. Backup Module
- C. Power Supply Module
- D. Cache Module
Answer: B
NEW QUESTION # 45
What are two valid back-end SAS cable connections on a VSP midrange system? (Choose two.)
- A. from DKA to SSW
- B. from ENC to ENC
- C. from DKB to ENC
- D. from DKA to DKB
Answer: C,D
NEW QUESTION # 46
The SVP of a VSP G900 system failed and you have been asked to replace it.
Which two items must be available to perform the replacement? (Choose two.)
- A. the iso file with the correct version of the Windows operating system
- B. the iso file with the correct version of Hitachi Ops Center
- C. the microcode iso file with the correct software versions
- D. the Hitachi Remote Ops Monitor Agent iso file
Answer: B,C
NEW QUESTION # 47
A customer wants to upgrade a VSP E1090 to 1TB RAM capacity.
What is the valid Cache Flash Memory (CFM) configuration?
- A. two BM65 per controller
- B. two BM70 per controller
- C. one BM70 per controller
- D. two BM65 per system
Answer: B
NEW QUESTION # 48
Which tool can be used to change System Option Modes (SOMs)?
- A. Hitachi Ops Center
- B. MPC software
- C. Webconsole
- D. HSAe
Answer: B
NEW QUESTION # 49
Which three RAID configurations are supported by VSP Midrange systems? (Choose three.)
- A. 4D + 1P
- B. 7D + 1P
- C. 8D + 1P
- D. 10D + 2P
- E. 2D + 2D
Answer: A,B,D
NEW QUESTION # 50
Which two reconfiguration activities are performed without interrupting host access on a VSP Gx00 system? (Choose two.)
- A. upgrading from G200 to G800
- B. adding a DKB
- C. adding a DB60 drive tray
- D. upgrading from G200 to G600
Answer: B,C
NEW QUESTION # 51
Which two VSP systems support attached Drive Box Flash (DBF)? (Choose two.)
- A. VSP G900
- B. VSP F370
- C. VSP E590
- D. VSP F700
Answer: C,D
NEW QUESTION # 52
You have added several drives to a VSP E1090 and the process has failed.
What should you do first?
- A. Isolate the failed drives and move them to empty slots to test them
- B. Use the DKU Inline Test from the MPC
- C. Perform a dummy replacement of the DKB
- D. Refer to the VSP Maintenance Manual troubleshooting section
Answer: D
NEW QUESTION # 53
What is the recommended RAID level when creating a Hitachi Dynamic Provisioning (HDP) pool on a VSP E1090?
- A. RAID 6
- B. RAID 1
- C. RAID 1+0
- D. RAID 5
Answer: A
NEW QUESTION # 54
Which two VSP systems support attached Drive Box Flash (DBF)? (Choose two.)
- A. VSP F370
- B. VSP F700
- C. VSP E590
- D. VSP G900
Answer: B,D
NEW QUESTION # 55
You are installing a VSP F370 and you need to connect your laptop to one of the controllers.
What are the two default IP addresses of the maintenance ports of CTL1 and CTL2? (Choose two.)
- A. 10.0.0.16
- B. 192.168.0.16
- C. 192.168.0.17
- D. 10.0.0.17
Answer: A,B
NEW QUESTION # 56
A customer has a VSP G370 with the encryption license key installed. They now want to have all the DP-Volumes of a certain pool located on encrypted RAID Groups.
What are two requirements? (Choose two.)
- A. The RAID level of RAID Groups in the pool must be RAID 6.
- B. The RAID Groups in the pool must be formatted with encryption enabled.
- C. The controller board must support encryption.
- D. At least 20 GB of Shared Memory must be installed.
Answer: B,C
NEW QUESTION # 57
33. A customer wants to remove a VSP G350 from production and virtualize it behind a VSP
5600 in a separate test environment. You inform the customer that as part of the move, it is faster to perform a new installation procedure of the entire VSP G350 system.
How is this accomplished?
- A. This can be done from HSAE in Maintenance Mode
- B. This must be performed by a Hitachi service representative or authorized partner using the MPC
- C. This can only be performed by a Hitachi service representative using the Maintenance Utility
- D. This can be done using the SVP Webconsole
Answer: B
NEW QUESTION # 58
A storage administrator wants to present an LDEV to a server attached to a newly installed VSP One B28 system. Two Host Groups have been created on ports CL3-A and CL4-A for this server.
Which three items should be registered in these Host Groups? (Choose three.)
- A. LUN
- B. RAID Group
- C. Host Mode
- D. WWPN
- E. Server Name
Answer: A,C,D
NEW QUESTION # 59
You are installing a VSP G350 system at a customer site.
Which tool allows you to apply the license keys?
- A. HCS License Key Management System
- B. SVP Web Console
- C. Storage Navigator
- D. Maintenance Utility
Answer: C
NEW QUESTION # 60
You need to replace a broken disk drive on a VSP G700.
What are two prerequisites? (Choose two.)
- A. You must wear a wrist strap for ESD protection.
- B. You must use the Replace button in the Maintenance Utility before removing the drive.
- C. The red LED on the drive must be lit.
- D. The Drive Box where the drive is located must be powered down.
Answer: A,B
NEW QUESTION # 61
What is the recommended RAID level when creating a Hitachi Dynamic Provisioning (HDP) pool?
- A. RAID 6
- B. RAID 1
- C. RAID 1+0
- D. RAID 5
Answer: A
NEW QUESTION # 62
The SVP of a VSP G350 system failed and you have been asked to replace it.
To perform the replacement which item do you need?
- A. the iso file with the correct version of the SVP Windows operating system
- B. the microcode iso file with the correct software versions
- C. a USB stick with the configuration backup
- D. the Hitachi Remote Ops Monitor Agent iso file
Answer: C
NEW QUESTION # 63
You need to upgrade the firmware on a VSP G700.
Which file must you select to perform the upgrade using the Maintenance Utility?
- A. All Firmware.mda
- B. setup.exe
- C. HA-SVP-xx.iso
- D. HA-MPC-xx.iso
Answer: C
NEW QUESTION # 64
......
Pass Hitachi HQT-4180 Exam Quickly With BraindumpsPrep: https://www.briandumpsprep.com/HQT-4180-prep-exam-braindumps.html
HQT-4180 Exam Questions (Updated 2026) 100% Real Question Answers: https://drive.google.com/open?id=1Cz2SPG-R-ARKj-wPWUnaOLBZ4FSK0Q4S
