Get Nov-2023 Dumps to Pass your 300-810 Exam with 100% Real Questions and Answers
Updated Exam 300-810 Dumps with New Questions
Cisco 300-810 (Implementing Cisco Collaboration Applications) Certification Exam is a professional-level exam that is designed to validate the skills and knowledge of the candidates in implementing Cisco Collaboration Applications. 300-810 exam is a part of the Cisco Certified Network Professional Collaboration (CCNP Collaboration) certification track and is intended for individuals who are looking to enhance their career in the field of collaboration technologies. 300-810 exam covers a wide range of topics such as implementing and configuring Cisco Unity Connection, Cisco Unity Express, Cisco Unified IM and Presence, and Cisco Webex Teams.
NEW QUESTION # 53
Refer to the exhibit.
Which two steps resolve the "Users with Duplicate User IDs" message? (Choose two.)
- A. Assign the duplicate user to the secondary Cisco IM and Presence node.
- B. Unassign a user from one of the clusters when the same user is assigned to two different clusters.
- C. Delete the user ID for the duplicate user ID.
- D. Rename the User ID value for one user if different users on different clusters have the same User ID assigned.
- E. Rename the directory URI value for one of the users to ensure that there is no duplication.
Answer: B,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/ configAdminGuide/10_0_1/CUP0_BK_C318987B_00_config-admin-guide-imp-100/ CUP0_BK_C318987B_00_config-admin-guide-imp-100_chapter_010101.html
NEW QUESTION # 54
Refer to the exhibit.
A customer reports that after a network failure, all of the Cisco Jabber clients are not switched back to their home nodes. An engineer determines that the primary Cisco IM&P server is in Failed Over state. Which two actions should be performed to bring the system back to operational state and to prevent future occurrences?
(Choose two.)
- A. Click the Fallback button in the Server Action pane.
- B. Set the Automatic Failover parameter in the Server Recovery Manager Service Parameters to the value True.
- C. Perform a restart of the IM&P primary server to force fallback.
- D. Advise all users to re-login to their Jabber clients.
- E. Confirm that both IM&P servers are configured in the Presence Redundancy Group configuration pane.
Answer: A,E
NEW QUESTION # 55
An engineer is configuring XMPP federation on the Cisco IM and Presence server and has changed the security settings to TLS Optional on one node in the cluster. What is the next step in the configuration process?
- A. Restart the Cisco XCP Router.
- B. Start the Cisco Replication Watcher.
- C. Start the Cisco DB Replicator
- D. Restart the Cisco Presence Engine
Answer: A
NEW QUESTION # 56
A collaboration engineer restored a failed primary node of an active/standby IM and presence subcluster with the server Recovery manager set to defaults. The engineer notices that the user is still assigned to the secondary server. Which action resolves this issue?
- A. Modify the DNS SRV records to point back to the primary server
- B. Select the Fallback button under Presence Redundancy Group Configuration
- C. Wait for 30 minutes for automatic fallback to occur
- D. Restart the services on the primary server
Answer: C
NEW QUESTION # 57 
Refer to the exhibit. An engineer must configure Cisco IM and Presence server high availability so that the publisher node fails over to the subscriber node if the publisher node becomes unavailable On the Presence Redundancy Group Configuration page the engineer receives this message 'High availability is not enabled for this cluster " Which two actions must the engineer perform to resolve the issue? (Choose two.)
- A. Replace iMPPub with IMPSub m the redundancy group.
- B. Select Enable High Availability and dick Save.
- C. Click Save and restart the Cisco Presence Engine.
- D. Add a new presence redundancy group and click Save
- E. Add IMPSub as a secondary presence server in the redundancy group
Answer: B,E
NEW QUESTION # 58
When Cisco IM and Presence is configured to use automatic fallback, how long does the Server Recovery Manager service wait for a failed service/server to remain active before an automatic fallback is initiated?
- A. 1 hour
- B. 20 minutes
- C. 10 minutes
- D. 30 minutes
Answer: D
Explanation:
Reference:
Automatic Fallback
Automatic fallback takes place when the server monitors the services and the Server Recovery Manager(SRM) service will automatically fallback users to their homed nodes. The key in this configuration is that the Server Recovery Manager(SRM) service will wait 30 minutes for a failed service/server to remain active before an automatic fallback is initiated. Once this 30 minute up time is established, user sessions are moved back to their homed nodes. The Jabber client will apply the re-log in upper and lower limits for the fallback. Automatic fallback is not the default configuration, but it can be enabled. To enable automatic fallback, change the Enable Automatic Fallback parameter in the Server Recovery Manager Service Parameters to value True.
NEW QUESTION # 59
After integrating Cisco Unity Express with Cisco Unified Communications Manager Express, users report that the system does not respond to key presses. Which two configuration snippets resolve this issue? (Choose two.)
- A. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g729r8 - B. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g711ulaw - C. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g711ulaw - D. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g729r8 - E. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay rtp-nte
codec g711ulaw
Answer: C,E
NEW QUESTION # 60
Drag and drop the SAML components from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 61
How is automatic fallback enabled on a Cisco IM and Presence server?
- A. In Communications Manager Service Parameter Configuration > Cisco Server Recovery Manager, change the Enable Automatic Fallback parameter to True.
- B. In the Presence Redundancy Group Configuration > Cisco Unified Communications Manager, check the Enable Automatic Fallback parameter.
- C. Automatic fallback is enabled by default.
- D. In IM and Presence Service Parameter Configuration > Cisco Server Recovery Manager, change the Failover parameter to True.
Answer: A
NEW QUESTION # 62
Refer to the exhibit.
Users report that they are prompted to accept server certificates when they initially run Cisco Jabber. An engineer removes these prompts to prevent confusion. Which statement about this scenario is true?
- A. Presentation of the certificates can be disabled by setting up Cisco IM&P servers into nonsecure mode.
- B. These certificates are self-signed certificates, so they must be added manually to the user OS certificate stores.
- C. Nothing can be done to resolve this issue because certificates must be accepted by each Jabber user, per Cisco policy.
- D. The behavior is a security breach because certificates are considered untrusted and as not coming from Cisco Collaboration servers.
Answer: B
NEW QUESTION # 63
When trying to send a call out of Cisco Unity Connection, what happens when enabling the transfer to an alternate contact number, located under caller input?
- A. The restriction table is checked when an administrator changes the extension number via the Cisco Unity Connection admin page.
- B. The restriction table is not checked when an administrator changes the extension number via the Cisco Unity Connection admin page.
- C. The restriction table is not checked when a user changes the extension number via a TUI conversation.
- D. The restriction table is not checked when a user changes extension number via the Cisco Unity Connection Cisco PCA page.
Answer: B
NEW QUESTION # 64
An administrator must Implement toll-fraud prevention on Cisco Unity Connection by using restricted tables.
Which action accomplishes this task?
- A. Permit calls only to specific domestic long-distance area codes.
- B. Allow calls to the international operator only.
- C. Allow calls to international operators and conference rooms only.
- D. Block all numbers that start with 999*.
Answer: A
NEW QUESTION # 65
An engineer must enable push notifications within Cisco UCM and the Cisco IM and Presence service cluster The engineer has already signed into the Unified Communications Manager publisher node Drag and drop the remaining configuration steps from the left into the correct order on the right to complete the configuration
Answer:
Explanation:
NEW QUESTION # 66
An engineer needs to configure individual call handler greetings on Cisco Unity Connection so that a single greeting can override all other greetings set by users during a holiday period. Which type of greeting should be configured to accomplish this goal?
- A. holiday
- B. internal
- C. closed
- D. alternate
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/administration/ guide/10xcucsagx/10xcucsag080.html
NEW QUESTION # 67
To redirect calls from the phone extension for user A to the voicemail greeting, which call routing rule should be used in Cisco Unity Connection?
- A. Attempt Sign-In direct routing rule
- B. Attempt Forward forwarded routing rule
- C. Opening Greeting direct routing rule
- D. Opening Greeting forwarded routing rule
Answer: B
Explanation:
Explanation/Reference: https://community.cisco.com/t5/collaboration-voice-and-video/unity-connection-call-routing-logic/ta- p/3162560
NEW QUESTION # 68
Which type of SRV record provides the location of Cisco Expressway-E?
- A. _cuplogin._tcp.example.com
- B. _collab-edge._tls.example.com
- C. _http._tcp.example.com
- D. _cisco-uds._tcp.example.com
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/ CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns- configuration-guide_chapter_010.html
NEW QUESTION # 69
What is the maximum number of Cisco Unity Connection locations connected in a HTTPS network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/https_networking/ guide/10xcuchttpsnetx/10xcuchttpsnet010.html
NEW QUESTION # 70 
Refer to the exhibit. An engineer assists a user who reports that the voicemall notifications show correctly on the desk phone are not available in the jabber client. Which action resolves this issue?
- A. Set the voicemail profile on the user's line on the CSF device.
- B. Reset the Jabber client and have the user sign in again
- C. Configure the voicemail profile on the user's service profile
- D. Ensure that the voicemail server is listed in the user's CTI profile
Answer: C
NEW QUESTION # 71
......
100% Pass Guarantee for 300-810 Exam Dumps with Actual Exam Questions: https://www.briandumpsprep.com/300-810-prep-exam-braindumps.html
Today Updated 300-810 Exam Dumps Actual Questions: https://drive.google.com/open?id=1_5LU8G1nRRYp0q9AeDtuw4YQ_y45-fP8
