Free Sales Ending Soon - 100% Valid FCSS_CDS_AR-7.6 Exam Dumps with 76 Questions
Verified FCSS_CDS_AR-7.6 dumps Q&As on your Fortinet Certified Solution Specialist Exam Questions Certain Success!
Fortinet FCSS_CDS_AR-7.6 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 15
Refer to the exhibit. You are troubleshooting a FortiGate HA floating IP issue with Microsoft Azure. After the failover, the new primary device does not have the previous primary device floating IP address.
What could be the possible issue with this scenario?
- A. FortiGate port4 does not have internet access.
- B. The error is caused by credential time expiration.
- C. A wrong client secret credential is used.
- D. The Azure service principal account must have a contributor role.
Answer: D
Explanation:
The debug output shows an AuthorizationFailed (403) error when FortiGate tries to update the Azure public IP. This indicates the Azure service principal account used by FortiGate does not have sufficient permissions. To manage floating IPs in HA, the service principal must be assigned at least the Contributor role on the subscription or resource group.
NEW QUESTION # 16
Refer to the exhibit.
Refer to the exhibit.
A Managed Security Service Provider (MSSP) administration team is trying to deploy a new HA cluster in Azure to filter traffic to and from a client that is also using Azure. However, every deployment attempt fails, and only some of the resources are deployed successfully. While troubleshooting this issue, the team runs the command shown in the exhibit.
What are the implications of the output of the command?
- A. The team will not be able to deploy an A-P FortiGate HA cluster with Azure Load Balancer.
- B. The team will not be able to deploy an active-passive (A-P) FortiGate high availability (HA) cluster with SDN connector.
- C. The team will not be able to deploy an A-P FortiGate HA cluster with Azure Gateway Load Balancer.
- D. The team will not be able to deploy an active-active (A-A) FortiGate HA cluster with Azure Load Balancer.
Answer: D
NEW QUESTION # 17
An administrator is relying on an Azure Bicep linter to find possible issues in Bicep files.
Which problem can the administrator expect to find?
- A. One or more modules are not using runtime values as parameters.
- B. There are output statements that contain passwords.
- C. Some resources are missing dependsOn statements.
- D. The resources to be deployed exceed the quota for a region.
Answer: C
NEW QUESTION # 18
Which Terraform command is used to apply infrastructure changes?
Response:
- A. terraform apply
- B. terraform destroy
- C. terraform plan
- D. terraform init
Answer: A
NEW QUESTION # 19
Refer to the exhibit. An AWS administrator created a change set to examine the effects of proposed changes to the current infrastructure.
Based on only the output shown in the exhibit, what will happen if the administrator applies these changes?
- A. The PhysicalResourceIdwill remain the same.
- B. The deployment will take place without any service interruption.
- C. The resulting FortiGate instance will lose its current local users.
- D. CloudFormation will roll back the current stack before updating it.
Answer: C
Explanation:
The change set output shows "Action": "Modify" and "Replacement": "True", meaning the FortiGate EC2 instance will be replaced with a new one. When an EC2 instance is replaced, its existing local configurations (such as local users) are lost, unless externalized to persistent storage or automation.
NEW QUESTION # 20
Which command is used in Azure Bicep to deploy a template?
Response:
- A. az deployment group create
- B. ansible-playbook
- C. bicep apply
- D. terraform plan
Answer: A
NEW QUESTION # 21
Which Fortinet logging and monitoring features can help diagnose VPN issues in cloud environments?
(Choose two.)
Response:
- A. FortiToken Multi-Factor Authentication
- B. FortiAnalyzer VPN Event Logs
- C. FortiGate Debug Commands
- D. FortiManager Log Forwarding
Answer: B,C
NEW QUESTION # 22
You are tasked with adding public cloud accounts to FortiCNP cloud protection. After adding an Azure account, you notice the status shows as Partially running. What can you conclude from that status?
- A. FortiCNP is verifying if there are enough license seats to add the account.
- B. FortiCNP will take approximately 15 minutes to change the status to Running.
- C. FortiCNP detected that you are using a free Azure account.
- D. FortiCNP may still be able to monitor the cloud account.
Answer: D
NEW QUESTION # 23
Refer to the exhibit. An administrator has deployed a FortiGate VM in Amazon Web Services (AWS) and is trying to access it using its public IP address from their local computer. However, the connection is not successful, and at the same time FortiGate is not receiving any HTTPS or SSH traffic to its external interface.
What should the administrator check for possible issue?
- A. Check the FortiGate firewall policies.
- B. Check the FortiGate instance ID.
- C. Check the debug flow for any network ACLs.
- D. Check the inbound rules of the security groups.
Answer: D
Explanation:
Since the FortiGate VM is not receiving any HTTPS or SSH traffic at all, the most likely cause is that the inbound rules of the AWS Security Group attached to the FortiGate instance are not permitting traffic on ports 22 (SSH) or 443 (HTTPS). If the Security Group blocks traffic, packets never reach FortiGate, which explains the absence of captured traffic.
NEW QUESTION # 24
Refer to the exhibit. An administrator implements FortiWeb ingress controller to protect containerized web applications in an AWS Elastic Kubernetes Service (EKS) cluster.
What can you conclude about the topology shown in FortiView?
- A. Both services will be load balanced among the two nodes and the four pods.
- B. This topology has two services and two ingress controllers deployed.
- C. Adding a new service will update the FortiWeb configuration automatically.
- D. The FortiWeb VM gets the latest cluster information through an SDN connector.
Answer: D
NEW QUESTION # 25
Refer to the exhibit. After the initial Terraform configuration in Microsoft Azure, the terraform plan command is run. Which two statements about running the terraform plan command are true?
(Choose two.)
- A. The terraform plan command will deploy the rest of the resources except the service principal details.
- B. You must run the terraform init command once, before the terraform plan command.
- C. You cannot run the terraform apply command before the terraform plan command.
- D. The terraform plan command makes Terraform do a dry run.
Answer: B,D
Explanation:
The terraform plan command performs a dry run, showing what actions Terraform will take without actually applying them.
Before running terraform plan, you must run terraform init at least once to initialize the working directory and download the required provider plugins.
NEW QUESTION # 26
A DevOps team is using Terraform to manage their infrastructure across multiple environments. Currently, the Terraform state file is stored locally on a developer's machine. The team decides to migrate the state file to a remote back-end machine.
Why is storing the Terraform state file in a remote location considered a best practice in this scenario?
Response:
- A. It eliminates the need to define provider configurations in the state file.
- B. It enables collaboration among multiple team members.
- C. It prevents the accidental deletion of the state file.
- D. It ensures that the state file is encrypted.
Answer: B
NEW QUESTION # 27
Which Fortinet solution provides centralized security analytics and logging for cloud workloads?
Response:
- A. FortiManager
- B. FortiClient
- C. FortiSIEM
- D. FortiToken
Answer: C
NEW QUESTION # 28
Your DevOps team is evaluating different Infrastructure as Code (IaC) solutions for deploying complex Azure environments.
What is an advantage of choosing Azure Bicep over other IaC tools available?
- A. Azure Bicep generates deployment logs that are optimized to improve error handling.
- B. Azure Bicep can reduce deployment costs by limiting resource utilization during testing.
- C. Azure Bicep requires less frequent schema updates than Azure Resource Manager (ARM) templates.
- D. Azure Bicep provides immediate support for all Azure services, including those in preview.
Answer: D
NEW QUESTION # 29
You need to deploy Fortinet solutions using Terraform in an AWS environment. Which command should you use to initialize the required Terraform provider?
Response:
- A. terraform init
- B. terraform validate
- C. terraform plan
- D. terraform apply
Answer: A
NEW QUESTION # 30
Which automation tool is primarily used to define infrastructure as code (IaC) in Microsoft Azure environments?
Response:
- A. Terraform
- B. Azure Bicep
- C. Ansible
- D. AWS CloudFormation
Answer: B
NEW QUESTION # 31
......
FCSS_CDS_AR-7.6 Exam Dumps - 100% Marks In FCSS_CDS_AR-7.6 Exam: https://www.briandumpsprep.com/FCSS_CDS_AR-7.6-prep-exam-braindumps.html
Exam Dumps Use Real Fortinet Certified Solution Specialist Dumps With 76 Questions: https://drive.google.com/open?id=1o67uZW7dHwXPNFmjZijrWoNA4faskg6Z
