[Feb 01, 2022] Latest 1Z0-1066-21 PDF Dumps & Real Tests Free Updated Today
1Z0-1066-21 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
Oracle 1Z0-1066-21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 30
Your client wants to exclude all of the inventory from the 'Reject' subinventory from only one of their supply plans. What action must be taken to meet this requirement?
- A. Manage Subinventories > Search and select subinventory > Deselect 'Nettable'
- B. Manage Subinventories > Choose a material status in which 'Nettable' is unchecked
- C. It is not possible to exclude one subinventory from a particularsupply plan.
- D. Manage Plans > Search and select supply plans > 'Organizations and Schedules' tab > 'Supply Schedules' >
'Subinventory Netting' > Deselect 'Reject' subinventory for each organization - E. Manage Plans > Search and select supply plans > 'Organizations and Schedules' tab > 'Organizations' >
'Subinventory Netting' > Deselect 'Reject' subinventory for each organization
Answer: E
NEW QUESTION 31
Which option outlines changes you can make to a simulation plan when evaluating demand and supply?
- A. Add demands, cancel demands, reschedule demands,add supply, cancel supply, reschedule supplies
- B. Change item specification values, change item lead times, create mass changes for items all at once, change item-organization specification values
- C. Change item specification values, change item lead times, change item-organization specification values
- D. Add demands, cancel demands, reschedule demands, add new planned orders, reschedule supplies
- E. Change item specification values, change item lead times, create mass changes for items
Answer: A
NEW QUESTION 32
You want to be able to filter your data by the planner code attribute on the item. Where can you go to do this?
- A. The process "Associate Measure Catalog Attributes" must be run to associate new attributes.
- B. Configure Planning Analytics > Levels and Attributes tab
- C. Enable planner code on Planning Analytics page.
- D. The process "Add Levelsand Attributes" must be run to associate new attributes.
- E. Configure Planning Analytics > Measure Catalog
Answer: C
NEW QUESTION 33
As the planner, you have made some changes to a few of the specifications for items in your simulation sets.
You would like to run one of your existing Demand and Supply Plans that contains this simulation set to see how these changes impact the plan.
Which option shows the steps you must complete in orderto ensure that when you run your existing Demand and Supply plan, it contains your changes to the simulation set?
- A. You are only able toupdate one item attribute at a time. Since you have changed multiple attributes, you will be unable to update and run this plan.
- B. When the Demand and Supply Plan is run, verify that 'Refresh with current data' is selected in the Details section.
- C. When the Demand and Supply Plan is run, verify that 'Recalculate Safety Stock' is selected in the Details section.
- D. Noadditional steps are necessary. Any plans that contain your simulation set will automatically be updated with the changes.
Answer: B
NEW QUESTION 34
Your current shipments forecast for Jan 2018 is 1000 and the demand planner determines that the forecast should be 1500. Describe how the demand planner can override shipments forecast. Also, what happens to the final shipments forecast measure when the demand plan is run again and the shipments forecast value changes to 1250?
- A. Open a table with the Adjusted Shipments Forecast measure and enter 1500. The Final Shipments Forecast measure will change to 1500. During the subsequent demand plan run, the Final Shipments Forecast value will change to 1250.
- B. Open a table with the Shipments Forecast measure and override it to 1500. The Final Shipments Forecast measure will change to 1500 and the value will persist during subsequent demand plan runs.
- C. Open a table with the Shipments Forecast measure and override it to 1500.The Final Shipments Forecast measure will change to 1500. During the subsequent demand plan run, the Final Shipments Forecast value will change to 1250.
- D. Open a table with the Adjusted Shipments Forecast measure and enter 1500. The Final Shipments Forecast measure will change to 1500 and the value will persist during subsequent demand plan runs.
Answer: D
NEW QUESTION 35
Your client wants to utilize product categories on sourcing rules. They have created a new categoryfor this and populated the items for it.
Where do they set up the category planning uses when evaluating sourcing rules?
- A. Manage Planning Source Systems
- B. Manage Sourcing Rules
- C. Manage Assignment Sets
- D. Manage Plans
- E. Manage Planning Profile Options
Answer: C
NEW QUESTION 36
Which disaggregation methods are used for each of these measures: adjusted shipments forecast, target service level, and shipments forecast?
- A. Adjusted shipments forecast uses measure, target service level uses same value, and shipments forecast uses self.
- B. Adjusted shipments forecast uses equal, target service level uses same value, and shipments forecast uses measure.
- C. Adjusted shipments forecast usesmeasure, target service level uses same value, and shipments forecast doesn't have any disaggregation method.
- D. Adjusted shipments forecast uses measure, target service level uses equal, and shipments forecast doesn't have any disaggregation method.
- E. Adjusted shipments forecast uses proportional, target service level uses same value, and shipments forecast uses measure.
Answer: A
NEW QUESTION 37
What is one method of associating a Safety StockQuantity value to an item?
- A. Upload the value using File Based Data Import (FBDI)
- B. Enter your value in the Safety StockQuantity Override column in the Items page.
- C. Run the Safety Stock Quantity Update Process.
- D. Enter your value in the Safety Stock Quantity column in the Items page.
Answer: D
NEW QUESTION 38
Should value in Adjusted Shipments Forecast measure always be equal to the Final Shipments Forecast measure?
- A. No, both measures will always be different.
- B. Yes,if the demand plan is approved and values are locked.
- C. Yes,if the adjustment is made at the same aggregation level at which itis viewed, or below.
- D. Yes, if the adjustment is made below the aggregation level at which it is viewed.
- E. Yes,if the demand plan hasn't been run again after adjustment.
Answer: C
NEW QUESTION 39
In order for Supply and Demand Plans to run successfully, which three Configure Planning Analytic tasks must be completed? (Choose three.)
- A. Set up Default Catalogs
- B. Run the Configure DimensionCatalog process
- C. Set up Hierarchy Attributes
- D. Set up Levels and Attributes
- E. Set up Measure Catalogs
- F. Set up Dimension Catalogs
Answer: D,E,F
NEW QUESTION 40
You are defining material planners for your organization. However, when you go to Manage Material Planners, your organization does not appear in the list of values. Why?
- A. The organization is an Item Organization.
- B. The organization was not enabled for collection under ManagePlanning Source Systems.
- C. The organization must be enabled in Manage Planning Profile Options.
- D. You do not have data access to theorganization.
- E. The organization must be enabled in Manage Planning Parameters.
Answer: B
NEW QUESTION 41
Your client manufactures consumer electronics and has all facilities live on Oracle Cloud. Their latest product has a very complicated manufacturing process and therefore can only be made at one facility (Organization ABC). However, it is ordered all over the world.
How should the Sourcing Rule be set up to accomplish this?
- A. A global sourcing rule for 100% make at ABC; a local sourcing rulefor 100% transfer from ABC
- B. Alocal sourcing rule for 100% make at ABC; a global sourcing rule for 100% buy from ABC
- C. A local sourcing rule for 100% buy from ABC; a global sourcing rule for 100% transfer from ABC
- D. A global sourcing rule for 50% make at ABC and 50% buy from ABC
- E. A local sourcing rule for 100% make at ABC; a global sourcing rule for 100% transfer from ABC
Answer: C
NEW QUESTION 42
You are setting up the plan page layout for your customer.
In which of these requirements would you use an Infotile?
- A. Showingcustomer demand trend over a specific time period
- B. Showing on-hand value compared to targets
- C. Showing inventory value across time
- D. Showing a breakdown of exception in a pie chart
- E. Showing inventory values by product category
Answer: C
NEW QUESTION 43
When analyzing demand fulfillment, what are the three types of recommendationsthat users can review and accept for expediting? (Choose three.)
- A. Expedite drop ship orders
- B. Expedite make orders
- C. Expedite transfer orders
- D. Expedite make to stock orders
- E. Expedite buy orders
Answer: B,C,E
NEW QUESTION 44
Which KPIs are available to measure forecasting accuracy and specify how thesemeasures aggregated from item-organization level to higher levels.
- A. MAPE, MFE, and Bias are used to measure forecast accuracy. MAPE and Bias are aggregated using weighted average. MFE is aggregated using sum.
- B. MAPE, MAD, and Bias are used to measure forecast accuracy. MAD and Bias are aggregated using sum. MAPE is aggregated using weighted average.
- C. MAPE, MAD, and Bias are used to measureforecast accuracy. MAPE and Bias are aggregated using weighted average. MAD is aggregated using sum.
- D. MAPE, MFE, and Bias are used to measure forecast accuracy. MAPE and MFE are aggregated using weighted average. Bias is aggregated using sum.
Answer: B
NEW QUESTION 45
......
2022 Valid 1Z0-1066-21 test answers & Oracle Exam PDF: https://www.briandumpsprep.com/1Z0-1066-21-prep-exam-braindumps.html
