Exam Dumps NS0-194 Practice Free Latest Network Appliance Practice Tests
NS0-194 Exam Questions | Real NS0-194 Practice Dumps
NEW QUESTION 71
Your customer calls at 8:40 a.m. indicating that the performance of his FAS2240- 2 is very slow for all protocols used (NFS, FC, and SMB).
The customer explains that the day before, he migrated half of his virtual machines (VMs) onto new VMware VMFS data store LUNs in the same volume as his old VMFS data store LUNs.
What are two reasons for the customer's problem? (Choose two.)
- A. Moving the VMs to different data stores put their low read load VMs on slow disks. Because the read I/O for those VMs is slow, this is impacting consistency points on the controllers.
- B. After moving the VMs to different data stores, the deduplication jobs that started during the night are still running. This is causing high disk utilization, impacting overall performance.
- C. After moving the VMs, they are now backed up as new data in that volume, causing the SnapVault relationships to still operate. This is overloading the disks and causing slow performance for all users.
- D. Moving the VMs elsewhere did not release the volume capacity used because of Snapshot copies. Now the volumes are too full and this will impact performance for all users.
Answer: C,D
NEW QUESTION 72
Referring to the exhibit.
A customer is attempting to protect the source volume listed in the exhibit. They try to initialize a DP mirror relationship to the destination volume but it will not initialize as expected.
Which two settings on the destination volume are causing this problem? (Choose two.)
- A. max-autosize
- B. volume size
- C. language
- D. type
Answer: A,D
NEW QUESTION 73 
In the AFF A200 shown in the exhibit, which port is a CNA port?
- A. e0c/0c
- B. e0a
- C. |0|0|
- D. 0a
Answer: A
Explanation:
Explanation/Reference: https://docs.netapp.com/platstor/topic/com.netapp.doc.hw-2700-install-setup/GUID-FE4BD3C8-
3DB4-438A-A5CE-FEEF74AE8BAF.html
NEW QUESTION 74
Your customer calls to report that he is seeing many cyclic redundancy check (CRC) errors on the FC-AL loop.
Which three commands would you use to determine the cause? (Choose three.)
- A. fcadmin link_stats
- B. fcp status
- C. fcstat link_stats <adapter name>
- D. fcp stats <adapter name>
- E. fcadmin fcal_stats <adapter name>
Answer: C,D,E
NEW QUESTION 75
A client is attempting to mount a UNIX security style volume using NFSv4. The client receives the
"permission denied" message, but mounting NFSv3 works fine. You have confirmed both NFSv4 and NFSv3 are allowed in the export policy.
Which statement describes this behavior?
- A. The export policy applied to the volume has superuser set to none.
- B. There is no proper name-mapping rule for the user mounting.
- C. NFSv4 takes file permissions into account when mounting.
- D. Extended groups for AUTH_SYS are enabled.
Answer: D
NEW QUESTION 76
Which two SVMs would benefit from a load-sharing mirror? (Choose two.)
- A. An SVM that is configured for FCP.
- B. An SVM that is configured for CIFS.
- C. An SVM that is configured for iSCSI.
- D. An SVM that is configured for NFS.
Answer: B,D
NEW QUESTION 77
You want to set up a FabricPool between an ONTAP cluster and Google Cloud Storage.
In this scenario, which two components are required to accomplish this task? (Choose two.)
- A. a Certificate Authority (CA) certificate
- B. a service account access key
- C. an Express Route
- D. intercluster LIFs
Answer: A,D
Explanation:
Explanation/Reference: https://www.netapp.com/pdf.html?item=/media/17239-tr4598pdf.pdf
NEW QUESTION 78
Snap Drive for Windows has been installed and configured on a VMware virtual machine. The virtual machine has been configured with raw device mappings (RDMs) that are mapped to LUNs on a NetApp storage controller.
The RDMs can be seen as connected disks in Windows Disk Management.
However, Snap Drive is not enumerating the RDMs.
Which action will solve the problem in this scenario?
- A. Snap Drive must be installed on tin* VhtualCenter server.
- B. Virtual Center or ESX servor logon settings must bo enabled and configured.
- C. Snap Drive must have the preferred storage IP addresses configured.
- D. Snap Drive and Virtual Storage Console (VSC) integration must be configured.
Answer: D
NEW QUESTION 79
A disaster causes a FlexGroup volume to be unrecoverable, but it was protected by a SnapMirror relationship. You solve the issue, and the source is operational. Now, you want to return to serving the data from the original source.
In this scenario, what do you do next?
- A. Initialize the SnapMirror relationship.
- B. Delete the SnapMirror relationship.
- C. Restore data from a backup copy.
- D. Perform a SnapMirror update.
Answer: A
Explanation:
Explanation/Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-fg-mgmt%2FGUID-
576192B0-18B8-40D3-AA3E-FC34415DC4F7.html
NEW QUESTION 80
Referring to the exhibit.
Your customer's MetroCluster controllers have generated AutoSupport notifications with a "DISK REDUNDANCY FAILED" message.
Referring to the exhibit, which component is causing the problem?
- A. the inter-switch link (ISL) between site1 and site3
- B. the SAN switch site3_3
- C. the ATTO bridges on site3
- D. the SAN switch sitel_2
Answer: A
NEW QUESTION 81
Which three conditions would prevent a normal giveback operation? (Choose three.)
- A. ongoing SnapMirror updates
- B. established CIFS sessions
- C. LUNs mapped with ALUA enabled
- D. presence of failed disks
- E. established NFSv3 sessions
Answer: A,B,D
NEW QUESTION 82
Which statement is correct for a mirrored aggregate?
- A. The aggregate is being copied.
- B. The aggregate is configured with SyncMirror.
- C. The aggregate is configured with SnapMirror.
- D. The aggregate has a RAID group that is double reconstructing.
Answer: B
NEW QUESTION 83
You have an ONTAP 9.3 cluster and create a new SnapMirror relationship with a SnapMirror type of DP. You initialization the SnapMirror relationship and verify that incremental updates are operating as expected.
However, you notice that the SnapMirror type is XDP instead of the specified DP.
In this scenario, which statement is correct?
- A. DP is not supported in ONTAP 9.3.
- B. All new relationships default to XDP.
- C. The destination cluster is running an older version of ONTAP.
- D. The SnapMirror policy type was set to MirrorAllSnapshots.
Answer: B
NEW QUESTION 84
A customer is using DP SnapMirror replication between two clusters. The source cluster is using Clustered Data ONTAP 8.2.3.
Which two versions are acceptable for the destination cluster to be operating? (Choose two.)
- A. 8.3.1
- B. 8.0.2
- C. 8.1.4
- D. 8.2.3
Answer: A,D
NEW QUESTION 85
Your customer's MetroCluster has generated a "DISK REDUNDANCY FAILED" message.
Netapp-EmA:
Tue Jan 14 04:12:12 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv' failed.
Tue Jan 14 04:12:13 CET [netapp-EmA:rv.connection.torndown:info]: HA interconnect: cfo_rv1 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'1 failed.
Tue Jan 14 04:12:15 CET [netapp-EmA:rv.connection.torndown:info]: HA interconnect: cfo_rv2 is torn down on NIC 1.
Tue Jan 14 04:12:18 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'2 failed.
Tue Jan 14 04:12:19 CET [netapp-EmA:bridge.removed:info]: FC-to_SAS bridge siteB_2:13.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111161] was removed Tue Jan 14 04:12:19 CET [netapp-EmA:bridge.removed:info]: FC-to_SAS bridge siteB_2:5.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111160] was removed Netapp-EmB:
Tue Jan 14 04:12:12 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv' failed.
Tue Jan 14 04:12:12 CET [netapp-EmB:rv.connection.torndown:info]: HA interconnect: cfo_rv2 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmB:rv.connection.torndown:info]: HA interconnect: cfo_rv1 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'1 failed.
Tue Jan 14 04:12:18 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'2 failed.
Tue Jan 14 04:12:19 CET [netapp-EmB:bridge.removed:info]: FC-to_SAS bridge siteA_2:13.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111167] was removed Tue Jan 14 04:12:19 CET [netapp-EmB:bridge.removed:info]: FC-to_SAS bridge siteA_2:5.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111164] was removed Referring to the messages shown in the exhibit for each node, which component is causing the problem?
- A. the ISL between siteA and site B
- B. the SAN switch siteA_2
- C. the SAN switch siteB_2
- D. the ATTO bridge on siteB_2
Answer: A
NEW QUESTION 86
You are asked to replicate 15 of 20 volumes and the network configuration of your storage virtual machine to your other data center.
In this scenario, which NetApp technology should you use?
- A. MetroCluster
- B. SVM peering
- C. SVM DR
- D. SnapMirror Synchronous
Answer: D
NEW QUESTION 87
......
Network Appliance NS0-194 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NetApp NS0-194 Exam Certification Details:
| Duration | 90 minutes |
| Exam Name | Support Engineer |
| Passing Score | 63% |
| Recommended Training | Introduction to NetApp Storage System Basic Components (WBT) Introduction to Clustered Data ONTAP Architecture (WBT) Introduction to Aggregates and FlexVols in Clustered Data ONTAP (WBT) Introduction to Networking in Clustered Data ONTAP (WBT) Introduction to High-Availability in Clustered Data ONTAP (WBT) Introduction to Data Protection in Clustered Data ONTAP (WBT) |
| Exam Code | NS0-194 NCSE |
| Sample Questions | NetApp NS0-194 Sample Questions |
| Exam Price | $150 USD |
| Exam Registration | PEARSON VUE |
| Number of Questions | 60 |
Verified NS0-194 Exam Dumps Q&As - Provide NS0-194 with Correct Answers: https://www.briandumpsprep.com/NS0-194-prep-exam-braindumps.html
