[Dec 10, 2021] Powerful C_TM_95 PDF Dumps for C_TM_95 Questions
Authentic C_TM_95 Dumps - Free PDF Questions to Pass
SAP C_TM_95 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 60
Based on the delivery schedule previously maintained in SAP SD, an Order-based Transportation Requirement (OTR) is created on TM side. In the OTR, the scheduling agreement and the delivery schedules with schedule items are stored as follows:
There are 3 correct answers to this question.
Response:
- A. The relevant release type (Forecast delivery schedule or Just-in-time delivery schedule) is also referenced on OTR item level.
- B. The Delivery Schedules are referenced with their original ERP IDs on OTR item level.
- C. For sales orders, destination locations are stored on root level.
- D. The Sales Scheduling Agreement is referenced as original order type and with its original ERP ID.
Answer: A,B,D
NEW QUESTION 61
Integration of SAP ERP orders and deliveries facilitates transportation planning and execution in SAP TM based on orders and deliveries created in an SAP ERP system. The orders and deliveries are represented by transportation requirements in SAP TM. Integration with SAP ERP enables you to:
There are 4 correct answers to this question.
- A. Perform tendering, subcontracting, and execution in SAP TM based on SAP ERP orders before delivery creation.
- B. Collectively plan transportation for all orders and across order types.
- C. Perform transportation planning in SAP TM based on SAP ERP orders before delivery creation. This forecasts transportation and resource demands.
- D. Sales Organization
- E. Propose and create deliveries based on dates and quantities according to transportation planning results.
This takes into account transportation constraints such as resource availability and transportation durations.
Answer: A,B,C,E
NEW QUESTION 62
On which level are locations stored on OTRs?
There are 2 correct answers to this question.
Response:
- A. For purchase orders, destination locations are stored on item level.
- B. For sales orders, destination locations are stored on root level.
- C. For purchase orders, source locations are stored on item level.
- D. For sales orders, source locations are stored on root level.
Answer: A,B
NEW QUESTION 63
You want to ensure that the system interprets rates entered into the rate table as percentages where can you make this setting?
- A. In the scale
- B. In the charge type
- C. In the instruction type
- D. In the calculation sheet
Answer: B
NEW QUESTION 64
If a plant, customer, or vendor is transferred from SAP ERP to SAP TM, and a transportation zone is maintained for this object, then during the transfer of master data, the following occurs:
There are 2 correct answers to this question.
- A. The plant, customer, or supplier location is assigned to the transportation zone in the SAP TM- relevant hierarchy.
- B. Support strategic sourcing by interfacing with supplier relationship management software
- C. The plant, customer, or supplier location is created.
- D. Provide role-specific, context-driven access for internal and external users to relevant information, tools, and services
Answer: A,C
NEW QUESTION 65
You can define the SAP TM-relevant hierarchy in Customizing. Choose Transportation Management - Transportation Network -Define Transportation Zone Hierarchy. The following conditions apply when you define a transportation zone hierarchy:
There are 2 correct answers to this question.
Response:
- A. You cannot assign a transportation zone A to another zone B if B already contains A.
- B. Determine routing based on Incoterms
- C. You cannot assign a transportation zone to itself.
Answer: A,C
NEW QUESTION 66
What is created manually in SAP TM and assigned to the shipping point location? Please choose the correct answer.
- A. Data receivers are networked without integration gaps.
- B. The business partner for the shipping point
- C. Connecting existing manufacturing control systems
Answer: B
NEW QUESTION 67
The Core Interface (CIF) is used to transfer both master data and transactional data to SAP TM.
Determine whether this statement is true or false.
Please choose the correct answer.
Response:
- A. True
- B. False
Answer: B
NEW QUESTION 68
Transportation via courier parcel is not an option supported by SAP TM. Determine whether this statement is true or false. Please choose the correct answer.
- A. True
- B. False
Answer: B
NEW QUESTION 69
Based on your company policy, the hazardous product POISON should NOT be transported on means of transport TRUCK unless authorized by user A.
How can you maintain the system reaction in the corresponding incompatibility definition used by user A?
There are 2 correct answers to this question.
- A. Automatic Violation: Incompatibility Must Not Be Violated Manual Violation: Incompatibility Must Not Be Violated
- B. Automatic Violation: Incompatibility Must Not Be Violated Manual Violation: Incompatibility Is Ignored
- C. Automatic Violation: Incompatibility Is Ignored
Manual Violation: Warninglf Incompatibility is Violated - D. Automatic Violation: Incompatibility Must Not Be Violated
Manual Violation: Warninglf Incompatibility is Violated
Answer: C,D
NEW QUESTION 70
What is automatically determined based on the object being transferred from ERP when location data is created via the CIF.
Please choose the correct answer.
Response:
- A. Intuitive mobile
- B. The location type
- C. MES Access
- D. Give operators
Answer: B
NEW QUESTION 71
Which settings can be maintained in a control key?
There are 3 correct answers to this question.
Response:
- A. TM Number
- B. Sales order Scheduling - Active
- C. Outbound Delivery to SAP TM
- D. Purchase order to SAP TM
Answer: B,C,D
NEW QUESTION 72
You have completed the configuration tasks for cost distribution and freight settlement in SAP TM and SAP ERP. The settlement documents were successfully transferred to SAP ERP.
Which of the following business documents in SAP ERP would you check to verify that the amounts and postings are correct?
There are 2 correct answers to this question.
- A. Shipment cost document
- B. Service entry sheet
- C. Agency billing document
- D. Freight invoice
Answer: A,B
NEW QUESTION 73
Shippers are often presented with challenges when shipping multiple products. One of these is the need to take into consideration what materials can be shipped together and what materials cannot. You use incompatibilities to define the compatibility of planning data that the system is to take into account during transportation planning, for example:
There are 4 correct answers to this question.
Response:
- A. A certain carrier should not be assigned to freight orders for a certain customer (blacklist).
- B. Freight units with different incoterms must not be transported together.
- C. source locations are stored on item level
- D. A certain means of transport cannot be unloaded at a location, since the location does not have a suitable loading ramp.
- E. Refrigerated goods must only be transported in appropriate means of transport (refrigerated trucks).
Answer: A,B,D,E
NEW QUESTION 74
You create a freight agreement request for quotation (RFQ) master with seven RFQ items.
* From three items for which the carrier A is not incumbent, carrier A is removed.
* Four other carriers are assigned to this freight agreement request for quotation (RFQ) master, You generate the individual freight agreement RFOs.
How many individual freight agreement RFQs are created for carrier A?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 75
Which of the following can you send from SAP TM to SAP Extended Warehouse Management for warehouse execution?
- A. Vehicle resource
- B. Freight unit
- C. Forwarding order
- D. Freight order
Answer: D
NEW QUESTION 76
A Scheduling Agreement is a framework purchase agreement or sales agreement under which materials are procured (on buying side). Products are delivered (on selling sides) on predetermined dates within a certain time period. The future delivery quantities and dates are entered as schedule lines in a delivery schedule.
To reflect forecasted quantities and dates along with the more detailed requirements, two different types of scheduling agreement delivery schedules can be used. These are the following:
There are 2 correct answers to this question.
Response:
- A. Sales order Scheduling - Active
- B. Forecast delivery schedules (FRC schedules)
- C. Just-in-time delivery schedules (JIT schedules)
Answer: B,C
NEW QUESTION 77
Which SAP ERP master data elements can be transferred to SAP TM?
There are 3 correct answers to this question.
Response:
- A. Customer
- B. Supply Area
- C. Shipping Point
- D. Material
Answer: A,C,D
NEW QUESTION 78
Assuming an agreement determination conditions is NOT used, which of the following involved parties determine the correct freight agreement for charge calculation in a freight order? Note: There are 2 correct answers to this question.
- A. Purchasing organization
- B. Carrier
- C. Forwarding house
- D. Ordering party
Answer: A,B
NEW QUESTION 79
The Core Interface (CIF) is important for its role in which of these processes:
Please choose the correct answer.
Response:
- A. Logging events in the transportation process.
- B. Integrating data from mobile apps.
- C. Replicating master data between an SAP ERP and SAP TM system.
- D. Integrating geographical information to render maps on screen.
Answer: C
NEW QUESTION 80
Which object do you have to create in SAP ERP if you want to use handover locations? Please choose the correct answer.
- A. Warehouse
- B. Customer
- C. Route
- D. Vendor
Answer: C
NEW QUESTION 81
What do you need to do when creating a custom calculation base?
- A. Define a resolution base for the calculation base
- B. Define a new charge type for the calculation base
- C. Define a scale base for the calculation base
- D. Implement a new helper class
Answer: A
NEW QUESTION 82
......
Guaranteed Accomplishment with Newest Dec-2021 FREE : https://www.briandumpsprep.com/C_TM_95-prep-exam-braindumps.html
