Assume Supermicro SMI300XE Dumps PDF Are going to be The Best Score
MI300X GPU SMI300XE Exam and Certification Test Engine
NEW QUESTION # 15
If you need to replace a failed GPU in an MI300X system, what must you do to gain access to the GPUs in the system?
- A. Use the LSPCI command.
- B. Configure the SCC.
- C. Remove the GPU tray.
- D. Update the AMD command.
Answer: C
Explanation:
Toaccess and replace a failed GPUin theMI300X system, you mustremove the GPU tray.
* Option A (Incorrect):UpdatingAMD commandsdoes not physically grant access to GPUs.
* Option B (Incorrect):LSPCIis used tolist PCI devices, not to physically access the GPUs.
* Option C (Incorrect):SCC configurationis unrelated to physical GPU replacement.
* Option D (Correct):Removing the GPU trayis the only way tophysically access and replace GPUs.
NEW QUESTION # 16
What is the correct syntax for the AGFHC command to run recipes?
- A. agfhc.exe -r-s alljvll.yml
- B. ./agfhc -r alljvll.yml
- C. /agfhc -t -a alljvll.yml
- D. ./agchf-r alljvll.yml
Answer: B
Explanation:
The correct syntax for running recipes using theAGFHC toolis:
bash
CopyEdit
/agfhc -r alljvll.yml
This command runsa specified YAML recipe file (alljvll.yml)using the AGFHC tool in aLinux-based system.
* Option A (Incorrect):Contains an incorrect flag (-r should be separated).
* Option B (Incorrect):Uses incorrect flag format (-t -a), which is not part of AGFHC syntax.
* Option C (Incorrect):Uses Windows-style .exe format, which is incorrect for Linux.
* Option D (Correct):This follows thecorrect AGFHC syntaxfor running recipes in a Linux environment.
NEW QUESTION # 17
When working on the GPU tray, where should you place it to ensure a safe work environment?
- A. On the floor where everyone is walking by
- B. On top of the chassis
- C. On a cardboard box that may or may not support the weight of the tray
- D. A flat surface
Answer: D
Explanation:
When handling theGPU tray, it should be placed ona flat, stable surfacetoprevent damage and ensure safety.
* Option B (Correct):Aflat surfaceprovides stability and preventsaccidental damage or tipping.
* Option A (Incorrect):Placing the trayon top of the chassiscan cause it tofall and sustain damage.
* Option C (Incorrect):Thefloor is unsafedue tofoot traffic, riskingaccidental damage.
* Option D (Incorrect):Acardboard box may not support the tray's weight, making itunstable.
NEW QUESTION # 18
The ROCm commands are not providing output or are failing. What could be the primary reason why?
And how can you validate the reasoning?
- A. If more than 3 GPUs are missing, then ROCm commands will not function. We need to verify that the 3 are missing in the IPMI GUI and review the GPU component section to make sure that at least 2 or fewer GPUs are missing.
- B. The GPU baseboard may not be detected. You can determine this by opening the IPMI GUI and reviewing the FW section.
- C. You suspect there are GPUs not detected. To determine which GPUs are missing, open the IPMI GUI and review the GPU component section to make sure all GPUs are present.
- D. CPU is not installed correctly on the server. Review the OS dmesg logs for any odd CPU messages, then if located proceed to reseat the CPU.
Answer: C
Explanation:
IfROCm commands fail to provide output, the primary issue is likelymissing or undetected GPUs. The best way to validate this is by checking the IPMI GUI and reviewing the GPU component sectionto ensure that all GPUs are present.
* Option A (Correct):Missing GPUsare the most common causeof ROCm failures. The IPMI GUI provides visibility into which GPUs are detected.
* Option B (Incorrect):CPU misalignment would causegeneral system failure, not ROCm-specific issues.
* Option C (Incorrect):The GPU baseboard status can be checked in IPMI but isnot the primary cause of ROCm failures.
* Option D (Incorrect):ROCm can function with multiple missing GPUs, butthe key issue is confirming GPU presence first.
NEW QUESTION # 19
What is the executable file extension used in Windows for SUM?
- A. .txt
- B. binary
- C. .exe
- D. .sh
Answer: C
Explanation:
This question is a duplicate ofQuestion No. 20. The correctWindows executable file extension for SUM is .
exe.
* Option A (Correct):SUM on Windows is executed using .exe.
* Option B (Incorrect):.sh is a script file format for Linux, not Windows.
* Option C (Incorrect):.txt files contain textand cannot execute commands.
* Option D (Incorrect):"binary" is not a valid file extension for SUM execution on Windows.
NEW QUESTION # 20
What are the 4 key statistical information points to note from the ROCm commands output? Choose 4 answers.
- A. Energy Counter
- B. vBios
- C. Firmware Details
- D. Temperature
- E. Socket Type
- F. Power Draw
Answer: A,C,D,F
Explanation:
TheROCm command outputprovides essentialGPU performance metrics:
* Option A (Correct):Energy CountertracksGPU power consumption.
* Option B (Correct):Firmware DetailsprovideGPU firmware version.
* Option C (Correct):Temperatureshowsreal-time thermal readings.
* Option E (Correct):Power DrawgivesGPU power usage data.
* Option D (Incorrect):vBiosis not a key ROCm statistic.
* Option F (Incorrect):Socket Type is not includedin ROCm statistics.
NEW QUESTION # 21
What is the main reason the AGFHC tool is not functioning properly?
- A. Missing 1 or more GPUs in the system.
- B. CPU 2 is missing and the AGFHC requires 2 CPUs.
- C. PSU needs to be reseated.
- D. Missing 1 DIMM in the system.
Answer: B
Explanation:
TheAGFHC tool requires a dual-CPU setupto function properly. IfCPU 2 is missing, the toolfails to operate correctly.
* Option A (Incorrect):Thetool does not depend on DIMM configuration.
* Option B (Incorrect):Missing GPUscan cause errors, butthe tool can still function.
* Option C (Correct):AGFHC requires both CPUsto be installed.
* Option D (Incorrect):PSU reseating isnot requiredfor AGFHC operation.
NEW QUESTION # 22
When replacing a failed GPU, what is the proper torque driver setting for tightening the GPU screws?
- A. 6-8 in-lbf
- B. 5.3 Nm
- C. 9.5 in-lbf
- D. 4.2 in-lbf
Answer: A
Explanation:
Thecorrect torque setting for GPU screwsin anMI300X systemis6-8 in-lbf. This ensures asecure fit without overtightening, which could damage the GPU.
* Option C (Correct):6-8 in-lbf isthe recommended torquefor securing GPU screws.
* Option A (Incorrect):4.2 in-lbf istoo low, leading to loose screws.
* Option B (Incorrect):9.5 in-lbf istoo high, risking damage to the GPU mounting.
* Option D (Incorrect):5.3 Nm isnot used for GPU mounting screws.
NEW QUESTION # 23
What information is useful for identifying system issues and their timing?
- A. Last login attempt
- B. Subnet Mask
- C. Event log
- D. GPU memory specification
Answer: C
Explanation:
Theevent logis the primary source of information for identifyingsystem issues and their exact timing. The IPMI event logrecords all critical system alerts, includinghardware failures, temperature warnings, power issues, and other critical errors.
* Option A (Incorrect):GPU memory specifications do not provide issue tracking information.
* Option B (Correct):Theevent log tracks all system events and errors, making it essential for troubleshooting.
* Option C (Incorrect):Subnet masks relate to network configurations and do not provide system issue tracking.
* Option D (Incorrect):Last login attempts show security logs but arenot related to hardware or system issues.
NEW QUESTION # 24
Which 2 ROCm commands should you run to gather AMD GPU information from the server?
- A. sudo rockm-smc, and sudo rockm-bug.report.txt
- B. sudo rocm-gpu, sudo rocm-baseboardgpu
- C. sudo rocm-smi -a, and sudo rocm-smi
- D. sudo rocm-csv, and sudo rocm-amd.bug.txt
Answer: C
Explanation:
TheROCm System Management Interface (rocm-smi)is the recommended tool forgathering AMD GPU informationfrom the server.
* Option D (Correct):
* sudo rocm-smi -a displaysall available GPU information.
* sudo rocm-smi showsbasic GPU stats.
* Option A (Incorrect):These arenot valid ROCm commands.
* Option B (Incorrect):"rockm-smc" and "rockm-bug.report.txt"do not exist in ROCm.
* Option C (Incorrect):"rocm-gpu" and "rocm-baseboardgpu" arenot standard AMD diagnostic commands.
NEW QUESTION # 25
When removing the GPU tray, why is it important that you keep it straight?
- A. Movement can damage the upper portion of the chassis or the fans below the GPU tray.
- B. You won't be able to set it on your work surface if you don't.
- C. Because of the screws on either side of the tray.
- D. The GPU tray only slides in or out at a 16-degree angle.
Answer: A
Explanation:
When removing theGPU tray, it is crucial tokeep it leveltoprevent damage to the chassis and cooling fans below.
* Option A (Correct):If the tray tilts, it canhit the upper chassis or damage fans below.
* Option B (Incorrect):There isno specific 16-degree angle requirement.
* Option C (Incorrect):Work surface placement does not impact removal safety.
* Option D (Incorrect):Thescrews must be removed first, but they do not affect the removal angle.
NEW QUESTION # 26
When working on the GPU tray, where should you place it to ensure a safe work environment?
- A. On the floor where everyone is walking by
- B. On top of the chassis
- C. On a cardboard box that may or may not support the weight of the tray
- D. A flat surface
Answer: D
Explanation:
m
NEW QUESTION # 27
In the IPMI Dashboard, how can the health event log help you identify a failure with a component like a fan or power supply?
- A. The red severity status identifies failed components in the log.
- B. The blades will be turning a bright orange.
- C. In IPMI under Configuration, configure a new fan.
- D. The purple status indicator in the IPMI Dashboard indicates failures.
Answer: A
Explanation:
TheIPMI Dashboard health event loghelpsidentify component failuresusing ared severity status indicator
. If a fan or power supply fails, theevent log will mark it as a red alert, allowing users to take corrective action.
* Option A (Correct):Red severity status in theevent logsignals a failed component.
* Option B (Incorrect):Fansdo not change colorswhen failing.
* Option C (Incorrect):There is nopurple status indicatorin IPMI for failures.
* Option D (Incorrect):You cannot configure a new fan inIPMI under Configuration; you must replace a failed fan.
NEW QUESTION # 28
......
Use SMI300XE Exam Dumps (2026 PDF Dumps) To Have Reliable SMI300XE Test Engine: https://www.briandumpsprep.com/SMI300XE-prep-exam-braindumps.html
SMI300XE PDF Recently Updated Questions Dumps to Improve Exam Score: https://drive.google.com/open?id=14ZNu95Tld_ZAk5dYIjKLGfLIvTFA9Mxa
