[2026] Use Valid Exam 300-535 by BraindumpsPrep Books For Free Website
Free CCNP Service Provider 300-535 Official Cert Guide PDF Download
NEW QUESTION # 59
Refer to the exhibit. XTC has been configured by an engineer. What does the IPv4 address represent on the snippet?
- A. destination address of the router on which it listens for PCEP
- B. configured for the local peer for state synchronization
- C. local address of the router on which it listens for PCEP
- D. configured for the remote peer for state synchronization
Answer: C
NEW QUESTION # 60
Which command configures the remote peer when the Cisco IOS XR Traffic Controller is used?
- A. peer-sync ipv4 192.168.0.3
- B. state ipv4 192.168.0.3
- C. state-sync ipv4 192.168.0.3
- D. peer ipv4 192.168.0.3
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-2/segment-routing/ configuration/guide/b-segment-routing-cg-asr9000-62x/b-seg-routing-cg-asr9000-62x_chapter_01001.html
NEW QUESTION # 61
When troubleshooting LDP operations on the Cisco IOS and IOS XE routers, what is one of the first things that should be verified?
- A. if running OSPF as the IGP, ensure that OSPFv3 has been enabled
- B. check if the ip cef command has been enabled
- C. verify if there are any access lists that are denying TCP and UDP port 464 packets
- D. verify in the running configurations that all of the required LDP interfaces are defined under the mpls ldp command configuration mode
Answer: B
NEW QUESTION # 62
What are two benefits of using Cisco NSO? (Choose two.)
- A. It can replace the CI/CD pipeline tools.
- B. It easily integrates into northbound systems and APIs.
- C. It uses load balancing services for better traffic distribution.
- D. It abstracts the device adapter and complex device logic from the service logic.
- E. It automatically discovers all deployed services.
Answer: B,D
NEW QUESTION # 63
Refer to the exhibit. Which lines of code need to be placed on the snippet where the code is missing in the script to connect to a Cisco IOS XR device via NETCONF over port 10000 and download the running-config in XML format?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
This option uses the variables host, PORT, USER, and PASSWORD as defined earlier in the script, and retrieves the running configuration in XML format from a Cisco IOS XR device using NETCONF.
NEW QUESTION # 64
After a configuration request is sent using NETCONF, which call releases any locks and resources associated with the session?
- A. <close-session>
- B. <boot-app>
- C. <close-activity>
- D. <exit-operation>
Answer: A
Explanation:
Reference:
https://tools.ietf.org/html/rfc6241
NEW QUESTION # 65
Refer to the exhibit. After this operation, what else is needed to change the hostname of the router to IOS-XR-SJC-19?
- A. <confirm>
- B. <commit>
- C. <get-config>
- D. <close-session>
Answer: B
NEW QUESTION # 66
Refer to the exhibit. What is the cause of the status of the interface subscription?
- A. The sensor-group "Interface-Counters" does not contain a valid YANG path.
- B. The router is waiting for a collector to dial in.
- C. The router cannot establish a gRPC connection with the collector.
- D. This is the expected state of an active subscription.
Answer: A
NEW QUESTION # 67
What is an interior YANG data node that exists in at most one instance in the data tree and has no value?
- A. tree node
- B. leaf node
- C. container node
- D. listing node
Answer: C
NEW QUESTION # 68
Refer to the exhibit. A network engineer is expecting the collector to initiate a gRPC session to the router. To accomplish this task, a subscription is specified. A Cisco IOS XR device was configured using the details in the exhibit. When the code is applied, the session is not initiated.
What is the issue?
- A. The proper sensor-path must be configured.
- B. The destination group must be configured.
- C. The sample-interval has an incorrect value
- D. The subscription must be configured
Answer: B
Explanation:
A destination group (collector address/port) must be configured for the telemetry data to be sent from the router to the collector. Without this, the subscription cannot deliver telemetry data.
NEW QUESTION # 69
Drag and Drop Question
Drag and drop the code snippets from the bottom onto the blanks in the code to construct an XPath query that retrieves the router ID for the OSPFv2 protocol. Not all options are used.
Answer:
Explanation:
Explanation:
NEW QUESTION # 70
Refer to the exhibit. Which two URI entries are optional and functional in this RESTCONF URI structure? (Choose two.)
- A. api-entry
- B. path
- C. query
- D. fragment
- E. operation
Answer: B,C
NEW QUESTION # 71
An engineer wants to replace the BLOCK_BAD ACL on the Cisco IOS XE router with this new content. The engineer wants to use RESTCONF for this and constructs a PUT request to the resource/restconf/data/native/ip/access-list/Cisco-IOS-XE-acl:extended=BLOCK_BAD. What must the body look like to achieve the Cisco IOS XE configuration?
Desired configutation:
ip access-list extended BLOCK_BAD
permit ip any host 192.168.20.1
deny ip any any
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: C
NEW QUESTION # 72
Drag and Drop Question
A developer is writing code that configures host routes on a router. Drag and drop the ncclient methods from the bottom onto the boxes in the code to create the desired script. Not all options are used.
Answer:
Explanation:
Explanation:
NEW QUESTION # 73
After a configuration request is sent using NETCONF, which call releases any locks and resources associated with the session?
- A. <close-session>
- B. <boot-app>
- C. <close-activity>
- D. <exit-operation>
Answer: A
Explanation:
Section: 3.0 Network Device Programmability
Explanation/Reference: https://tools.ietf.org/html/rfc6241
NEW QUESTION # 74
Refer to the exhibit.
XTC has been configured by an engineer. What does the IPv4 address represent on the snippet?
- A. destination address of the router on which it listens for PCEP
- B. configured for the local peer for state synchronization
- C. local address of the router on which it listens for PCEP
- D. configured for the remote peer for state synchronization
Answer: C
Explanation:
Reference:
http://ipnetworkgeek.blogspot.com/2017/05/path-disjointness-with-ios-xr-traffic.html
NEW QUESTION # 75
......
Cisco 300-535 exam is an excellent choice for IT professionals who are looking to advance their careers and specialize in automating and programming Cisco collaboration solutions. By passing 300-535 exam, you will demonstrate your expertise in this field and gain recognition as a qualified professional with the necessary skills to work with Cisco collaboration solutions and automation tools.
Cisco 300-535 Official Cert Guide PDF: https://www.briandumpsprep.com/300-535-prep-exam-braindumps.html
Exam 300-535: Automating and Programming Cisco Collaboration Solutions - BraindumpsPrep: https://drive.google.com/open?id=1DWy-a3myc8sk96ZuDQE0Gy5qhGr9ApPR
